Hallo und Guten Morgen nun habe ich einen neuen Rechner mit Nvidia etc. welche Einstellungen benötigt OBS damit es in H265 streamt
DP0POL/mm in CW on .519
DP0POL/MM QRG .760 LOC IE17
mal schnell "HALLO" sagen... 73 an alle... Danke für die Aufnahme im Forum!
Felix DP0POL/mm in CW on .521 up Locator IC47
DP0POL/mm SSB QRG .760 up Loc IC47
DP0POL/mm SSB QRG .865 up Loc IC47
DP0POL/mm SSB QRG .865 up correction Loc IC46
DP0POL/mm QRT for now.. https://amsat-dl.org/en/dp0pol…-non-stopp-in-antarctica/
Hallo und guten Abend habe nun ein neues Notebook mit Geforce 1650 das laut Nvidia auch H265 Encoding kann aber im OBS wird das mit H265 nicht angezeigt. Gibt es einen Trick ?
QRH of the DK0SB-Beacons? I hear the that frequency of the uplink beacons is jumping a few Hertz -- at least I sincerely hope its the uplink and not the SAT!
Die Bake springt immer noch hin-und her.....
Beacons are unstable since a few days, but today it is pretty extreme.
We are currently investigating the Beacon jumping.. might be a problem in Bochum with the central 10 MHz GPS/Rubidium reference..
Due to instability of our HP Z3801 (GPS-locked) 10 MHz reference we switched over to a back-up R&S Rubidium reference in Bochum (DK0SB). It's still warming-up, so some offset is possible.
The reference frequency is too low and thus the beacons are transmitting about 230Hz too low ... it is planned to correct this in the next days ...
TNX, guys! I am really happy that the bug is in the Bochum ground station and not some 35.000 km abover ground ...
after some warming up the Rubidium frequency seems to be pretty much on frequency now, at least it's stable and not jumping anymore; giving is some time for repair or new equipment...
Die Jagd kann beginnen, der AMSAT-DL Warenversand ist teilweise wieder verfügbar.. Rest folgt...
6W-PA für ADALM Pluto verzögert sich noch um 1-2 Wochen, da die Verstärkung noch weiter verbessert wurde und ein paar passive Bauteile getauscht werden müssen..