yep, around 10 dB stronger than the CW-beacon ; -)
DA0APOLLO mit DL50AMSAT nun auf .771
On the WB-DATV transponder now: Neil Armstrong is speaking again as DA0Apollo and DL50AMSAT from space to earth !
zs50moon now .781
ZS50MOON on .788
yi1sal and yi3whr on .688
10489730.16 A92GR Mohamed from Barain
whoevers currently testing on 489.670, tuning up and down a bit, using a morse keyer to send dits and dahs, counting in italian and doesn't mention callsign - your signal peaks 15dB over the beacon you may want to check your RF output
10489727.5 ZS50MOON Curt
G4GIR : my QSO with S01WS via QO-100 shows up in clublog as "13cm phone"
Thanks for the replies, I should have been more specific,, I was wondering if anyone had received a QSL for a QSO via QO-100 with S01WS, yes I have several QSL'S for HF QSO's via OQRS, but my QSO via QO-100 is not showing up in OQRS,
Hi Everyone, I'm new to this, and I was wondering if there is some public database where I can find the satellite radiated power for beacon frequencies?
G4GIR . I got several QSL from S01WS for all my QSOs - but you have to choose direct QSL and pay via PAYPAL - but this way QSL was 100% OK every time
G4GIR didn't received QSL from S01WS wrote email to manager not answer!
Hi All, has anyone managed to see/get a QSO confirmation for S01WS through OQRS?
pa1kek Ku band partial feed antenna offset Angle 45-27=18
pa1kek Dish feed alignment?
Goodmorning Remco, i have question related to the dish aligment: i'm in Leiderdorp; i can receive the satelite only if i alignt the dish at 45 degres elevation intesd of 27 ! Do you have any idea why ? Besides the level of signal is poor ! Thanks for any suggestions.
.681 YI1SAL (Salam)
DL8DAK schreib mir nochmals die Frequenz für EA8
DD0KP hast post
do1ctl Frank brächte mal deine Hilfe.. schick mir mal deine Telefonnummer per email.. Danke Heiner..