Jean-Pierre I have created my login on the Minitioune forum and have requested my activation email 4 times today and it is never coming through. Not in spam/junk/trash folders. How can I complete my registration. Username mccla5214. Thanks, Mike-KA5TDA
YL/LA9TAK/p on .764
DD0KP Heiner, I don't what your link really is but it does not seem to be live... the videos are awesome, but obviously "fake live"
WATCH: Astronaut Spacewalk Earth Views from NASA FEED "https://www.youtube.com/watch?v=EXkwYTNfCKg"
H. 17.30z - What is digital signal at 10.489.570 ?
G6WRW/p on .800
DK1ML danke, Du meinst direkt am LNB? Aber dann bräuchte ich doch einen Dämpfer am Eingang? Wieviel dB müßte der denn hBen?
DO5MSH Der Pluto kann doch direkt auf die Frequenzen, dazu brauchst Du keinen Up- oder Downconverter. Zur Ansteuerung des AMSAT Upconverters müsste ein 30dB Treiber her. Lieber neues Pluto Setup mit PA aufbauen.
Moin, Anfängerfrage: Ich möchte einen PlutoSDR in das Ensemble AMSAT-Downconverter V3d & AMSAT-Upconverter UpCon6W integrieren. Brauche i h (was) dafür ein Dämpfungsglied und / oder. orverstärker?
Please look at the post. Thank you.
Ok the reception at 2.400 mhz but immediately after the spectrum does not display any RF signal in the air! Rye broadcast locally with another Pluto.
Hi everyone ... Has anyone tried to receive over 2,400 MHz with DVBS Demod GUI?
v51dm 650 v55qo 700 v51sa angela robert 680 zs95qo gary 720 zs1arb 810 st2yl reem 830
10.489.650,00 Ham Radio Africa Special by DK3ZL with many interesting stations
No matter how many times I exit, store, save, that configuration box is not there and checking the rotor setup, the N or the S is gone. How do I fix please? TU Frank
Hello....I am having great troubles try to set up the rotor. I choose the correct interface (Yaesu 232) and then type in N or S as the help box directs. I then exit and no setup box to configure the correct com port and baud rate.
And I mange mi technecal part well but just only Class E So that was not covered in detail
DK1ML , why had the British Amateur Television Club on his page/forum a PCB with such a 50 to 75 Ohm adaption https://forum.batc.org.uk/view…=15&t=3122&p=17416#p17343 ? Did I misinterpret something?
DO1OHB How did you manage the technical part of your license? For reception it makes no difference, if you use 75 or 50 ohms. The impedance is only reactance, not real resistance.
DD0KP, behind the BIAS is still 75Ohm Impedance, due I need a Impedance adaption 75 Ohm to 50 Ohm? If yes how?