BIG I had no problems with the new version 2.0.12 immediately my first reception of the Beacon QO100 other texts that we see that I will give to the next videos I receive
73 Tony IK1HGI
Hi, congratulations 
The derotate slider makes the constellation worse. don't use it for dvb-s2 
Just leave it all the way to the left
Sadly still no "scan" function 
It would be great if this feature would be added .
73s
Hi, congratulations
The derotate slider makes the constellation worse. don't use it for dvb-s2
Just leave it all the way to the left
ok done all left I didn't understand what maybe! of facts now and all ok understood the parts of the program but I preferred the constellation blue ciao 73 Tony IK1HGI
@SWL - markro92: marcel, thanks for the new version. I have been playing around a little bit with it and it seems to be decoding faster with the new version.
>Showing Ku-Band Lo/Hi frequencies next to IF frequency.
What I tried to do is to adjust the frequency offset in the device.ini-file but without success. I use a modified LNB and my L.O. is around 9.500 MHz. I am also missing the readme.txt file that supposidly is explaining on how to set up the parameters.
How can I adjust the L.O. frequency so that the correct receiving frequency is shows?
Best 73
Holger 'Geri', DK8KW
Yes that's correct 
i thought about including an option in the config file for that, but i didn't want to keep you waiting any longer. definitely next version, which will be very soon, i think next week. I'm working on multithreaded LDPC decoding, because that's the bottleneck right now.
ALso, i forgot to include the readme.txt, i'll update it and put it into the next update.
Hallo Marcel,
vielen Dank für die neue Version. Die Software läuft prima.
Danke
Erich
Hallo Marcel,
vielen Dank für die kontinuierliche Weiterentwicklung der Software.
Ich habe einen LimeSDR-USB und würde ihn gerne auch für DATV Empfang verwenden.
Leider erscheint beim Starten von DVB-S" GUI in der Auswahlliste oben mein LimeSDR nicht.
Ich vermute ich habe etwas noch nicht richtig konfiguriert, denn der Lime funktioniert mit SDR-Radio einwandfrei.
Hast Du einen Tipp, was ich machen kann damit er erkannt wird ?
Falls sonst jemand hier in der Gruppe einen Tips hat, dann sind sie natürlich auch herzlich willkommen.
Viele Grüße
Matthias
Hallo Marcel,
ich verwende einen LimeSDR mini, auch als TRX mit der Console.
Funktioniert mit diesem Decoder ohne Probleme. Der Lime muss beim Programmstart oben in der Auswahlliste neben "Open Device" zu sehen sein, sonnst ist er nicht korrekt initialisiert. Ist mir bei einem Absturz dieser GUI mal passiert. Dann USB Stecker ziehen, neu verbinden und Software neu starten.
73 de Peter
Hello Marcel, thank you for the new version.
The synchronization seems to work better.
Can someone please tell me if I can also use the SMPlayer? That just does not work.
73 de Peter
I stucked here
can anyone help me how to set LVC to get the video or any tutorials how to? If my setup is corretly
I have tried with lime sdr mini but the same problem I think.
Question how to set VLC media player to see the video?
Don't even bother with trying to see video while the constellation diagram is a circle. You need 4 dots (well, rather blobs) in the 4 quadrants before even thinking about vid. Try marko92's suggestions again, with loop gain and fine tune enable.
I have no idea how to get 4 dots...Im trying to get signal in the middle and then changing Kp and Ki but not even close....
I'm looking for any manuals to help me
Hi Jan,
1. Carrier Recovery = ON
2. Check if the signal is synchronized (four circles)!
3.TX = ON
4. enter in VLC address (udp://@:8888)
73 de Peter
