Hang on - its working with IK8XLD - he is very strong. I think the problem is the Lime RF gain is not being set correctly. Could that be it?
Software DVB-S demodulator
-
-
fb i have tested quick and its works mutch beter than te last version on my sdr-play
very fast sync now from 2M till 250 no probs.
-
One useful function i am still waiting for is the automatic FEC setting from the Signal info.
On every DATV signal you have to manually set the FEC to the value already shown in the Signal info.
Maybe this could be implemented in the next Version?
Tnx
-
sdr-play boys to remember... if you have problems...
yes you will
Install :
API/HW Driver – v3.04 (9th Jul 2019)
Instal it in the same map were you placed the DVB-S Demodulater...
open the map and you will find a "SDRPLAY" map
Open it...
Open the map API...There you will find x64 and x86....(64 and 32 Bit pc!!!)
open the map and find "sdr_play.api and lib"
Copy both to the dirctory of the DVB-S DEmod
Greeting and succes
-
@SWL - markro92, good job again, thanks!
Version 2.0.13 works fine here, using a Q8400 processor @ 2.66 GHz. Once I realized that the BB Gain slider was at "zero" in the beginning, I am now able to quickly synchronize almost every station now. Also, the Transponder Overlay is very helpful.
Rig here currently: modified Octagon in 1.8m offset dish made by Kathrein, 20m cable, Nooelec RTL stick.
Best 73
Holger 'Geri', DK8KW
-
Hello,
sdr-play boys to remember... if you have problems...
yes you will
Install :
API/HW Driver – v3.04 (9th Jul 2019)
Instal it in the same map were you placed the DVB-S Demodulater...
open the map and you will find a "SDRPLAY" map
Open it...
Open the map API...There you will find x64 and x86....(64 and 32 Bit pc!!!)
open the map and find "sdr_play.api and lib"
Copy both to the dirctory of the DVB-S DEmod
Greeting and succes
Thanks a lot for this information, it recognizes my SDRPlay now
Just wondering if there are similar procedure for AirSpy and Lime SDRs?
Regards,
Ed PY2RN
-
downloaded now first encoding immediately I had no problems windows 10 the use i3 64 bit ram 4
thanks SWL - markro92
73 Tony ik1hgi
-
Hi Tony, that's good news, great to hear it
73's,
Marcel
-
I allowed myself to give these info they always ask how do you receive the signals and very difficult to use DVBS Gui, I explained how to solve the way of receiving
73 Tony ik1hgi
-
Hi, quickly wanted to let you know that i've just ordered myself an Adalm Pluto
I'll try to add support to the demod gui the week before christmas.
Also, one of my goals is to implement LDPC decoding with multiple CPU cores.
Marcel
-
@SWL - markro92, nice to know that.
If you need beta tester, I volunteer
-
Hello tonight I receive Tomasz Salwach a beautiful constellation of 8 balls never seen before after 6 months active with DVBS_GUI, with the new version and a pleasure to receive, I use a parabola 1 meter and above all I must always thank you Thanks . SWL - markro92.
73 Tony ik1hgi
-
Hello tonight I receive Tomasz Salwach a beautiful constellation of 9 balls never seen before after 6 months active with DVBS_GUI, with the new version and a pleasure to receive, I use a parabola 1 meter and above all I must always thank you Thanks . SWL - markro92.
73 Tony ik1hgi
It was 8 not 9...8 is 8PSK this is the reason. Sometimes you will see 16 as 16PSK.
73
-
It was 8 not 9...8 is 8PSK this is the reason. Sometimes you will see 16 as 16PSK.
73
Yes Alessio sorry
73
-
Hi, quickly wanted to let you know that i've just ordered myself an Adalm Pluto
I'll try to add support to the demod gui the week before christmas.
Also, one of my goals is to implement LDPC decoding with multiple CPU cores.
Marcel
Super..
Here also volunteer for pluto beta test.
Benno
-
Hi, i got the PlutoSDR working and i'm quite impressed. It's outperforming my other hardware so far
version 2.0.14 is around the corner, but there are a few things that still need rework. I'm aiming for a release on thursday. The LDPC decoder now uses all available threads to distribute the work. I was able to receive newsfeeds at 23,5°E with 7200ksym 8PSK 3/4.
The Screenshot shows the transponder 11679V at 23,5°E (polish radio stations)Random question: is someone running this on AMD hardware?
-
Version 2.0.14
Download: http://v.1337team.tk/dvb-s_gui_amsat.zip
Changelog:
- Added automatic modcode selection for DVB-S2 frames.
- Added experimental support for PlutoSDR (Adalm Pluto)
- Multicore LDPC Decoding
- Slightly increased FIR Filtering performance (about 10%)
- Support for dragging the transponder overlay, instead of only handling click events.
- More compact UI to be more suitable on devices with smaller screen resolution (e.g. 1366x768)
- Worker Stats debug box is now hidden by default.
PlutoSDR support is still experimental. For me, 5 and 6MHz are the only Bandwidths that really work without dropping samples.
LDPC decoding with multiple threads seems stable on my system. I'd like to hear your reports about CPU utilization etc...
If some of you can test symbolrates between 2MS and ~8MS, that would be great. There are many transponders on Broadcast satellites.
Next, i need to cleanup the codebase and do a experimental linux build. Probably with reduced support for input devices. Tell me which linux distributions you use. (Arch Linux fan here :D)
Thanks for testing
Marcel
-
Downloaded and tested with the WB Beacon with Adalm Pluto.
It runs ok.
I'll test with narrow transmissions later and keep you posted.
Thanks once again for your work. -
Tested with Adalm Pluto the WB Beacon and 90cm dish.
Tnx !
73
Sandro Ribeiro
PY1SAN - GG77SN
-