It's one of the pins in the DIN socket on the Icom. There is a corresponding pin in the D-shell power connector on the Kuhne unit.
KUHNE Up- and Downlink Setup by HB9RYZ with one Dish and a DualFeed
-
-
...or just "modify" your TRX to send 12V+ via the coax when the PTT is pushed. I did it this way to avoid additional cable works.
73 de Johannes, DL5RDI
-
...or just "modify" your TRX to send 12V+ via the coax when the PTT is pushed. I did it this way to avoid additional cable works.
73 de Johannes, DL5RDI
you modify a brand new icom 9700?
-
No, not a IC9700, but a FT817, a FT290RII, a TR751 and a TS2000x.
Should also be possible in an IC9700
73 de Johannes, DL5RDI/AC2TR