MiniTioune V0.9 beta optimised for QO-100

Hi,

question....

withs HW works together with Minitioune software?

greetings to all

on7kec Minitiouner from BATC, MiniTiouner Express from DATV-express and Minitiouner Pro V2 from R.E.F.

Hello Heiner, have you already tried the MiniTiouner Pro V2 from R.E.F? I would be interested if he needs less pc performance than the Express ....?

yes I tried and it workes. Comparison of the performance to the MiniTiouner Express I did not up to now.

Danke fur dein info Heiner

Help I can't solve the graphic signal of the video I installed all the graphics card drivers Gerfor 8800GT I still see the RED sticker !!!! a week and I don't know where to hit my head how can I solve the problem?

thanks 73 ik1hgi Tony

Are the right .GRF files in the minitioune directory? ursc.ax installed? Did you try graphstudionext?

Mike

Hello Tony,

are all tests from "CheckMiniTiouneDriverAndFilters_V0_5a" programm ok?

ik1hgi Tony You should install the version 0.8s first. then when all test are passed as Robert described and you can see the beacon.

Then you can install version 0.9 and use this one..

Quote from DD0KP

ik1hgi Tony You should install the version 0.8s first. then when all test are passed as Robert described and you can see the beacon.

Then you can install version 0.9 and use this one..

@DD0KP Thanks after two hours of understanding I read your info and it was useful I don't know how to thank you I was happy I didn't recur this maneuver after hours hours my I remembered 6 months ago I did this what you ask

73 ik1hgi Tony

Quote from G0MJW

Are the right .GRF files in the minitioune directory? ursc.ax installed? Did you try graphstudionext?

Mike

@Mike yes download version 8 I found the missing wires decode Mpeg2.GRF, Newdecod Mpeg2.grf, Newdecod H264.grf, decod H264.GRF, Usrc.ax, and I solved the problem thanks for your help

73 ik1hgi Tony

I am 3 nights I can not encode this blessed Sym Rate 2000 no coding !!!!! I had to activate Minitiouner to understand who, maybe until the end IW4APQ my friend Franco, difficult with the DVBS program Gui v 2.12 SWL - markro92 you can get on the new version, the ways to find a fast coding performance to the DVBS GUI program

73 Tony ik1hgi

v0.9 working nicely here, although sometimes it demand a high c/n which I do not get from here in gg66lw

73

Ed

PY2RN

Hi all,

Installed the MiniTiouner software V0.8 without any problem and got nice DATV signals from QO100.

I wanted to upgrade to V0.9beta8_9, softeare installed in the same directory as V0.8 and also a new directory

in both cases no DATV decoding

Went back to V0.8 and again good DATV signals from QO100

I use the Amsat-DL down converter between the LNA (with 25MHZ ext. ref.) and the BATC MiniTiouner USB receiver

The only difference i see is in the red circled area

Am I missing something?

Click on the Oscar 100 button to get a selection of frequencies for different SR rate. Also 3 memory buttons you can use for frequencies and SR rates which can make it easier when jumping between a couple of specials for yourself say during a QSO!

You also have 8 presets rather than 5 and I believe some fine tuning internally particularly for QO-100 although what I am not sure. I do find the dials at the bottom easier to read.

Adrian

Thanks Adrian

but that does not solve my problem sadly

Hi,

have you tried to tick on the "wide scan" button?

Seems that MT is not locking.

DG8KD, tried that also.

The only thing i see than is that the "Carrier" Led is flashing (when the "Wide scan" is on)

Bert

Does flashing indicates that in some point in time a carrier is recogniszed but not locked?

Have you also tried to adjust the offset frequency a litte bit to higher or lower values?

BTW: PIDs are different !!

Will continue searching.

it is probably indeed something with the offset....