MY QO100 SETUP

Hi,

My 5.76 GHz transverter.

Hi,

Just before closing the 5.76 GHz transverter.

Hi,

Totally portable @ dummy load 2.320, 5.760, 10.368 MHz !!!

Hi,

A pair of GNURadio flowchart created permitting remote NB QO100 operation. A bandwidth of about 1 Mbit is used in both directions. A FFT spectrum of all the transponder is visible remotely and a waterfall of 8 KHz used is visible also. The important is that IQ data is transmitted in both directions and any possible NB mode is capable remotely. In other words mode is independent of server side. PTT signal is also available remotely. ZEROMQ is used for passing data and control signals.

Hi,

Converting a 4€ Amiko L107 LNB to 10-12 GHz down converter, adding also a 12V bias tee.