Modified "My First Venton" for single coax operation.
Needs about 0 - +3 dBm. I have 12pF + 2u7H in series from the F-connector directly to a crystal pad (crystal and caps remove). Cut a small slot in the cover wall to accomodate.
Also removed the second crystal line to improve stability. On the DC line I have 10 + 12 ohms in series. Operation is very reliable with +9Vdc.
I also modified a DX Patrol LNB PLL Reference & Bias-T unit for single coax use as per my triplexer design, but this still needs a more accurate 10 MHz external reference as the DX-P TCXO is 65kHz too low @ 10 GHz.