Good day to all. I have been receiving SSB(NB) voice from QO-100 but unable to receive DVB-S2 signal.
1: SDR#/SDR Console
2: 65 CM DTH DISH (offset)
3: RTL SDR BLOG V3/SDRPLAY RSP 1A
4: Bias Tee
5: USB to 12 V DC-DC boost cable
6: 19 V Laptop Power Adapter
(One for V and other for H modulation switching)
8: LNB 40 dB,LNB 70 dB
9: Generic DVB-S2 Receiver KOQIT Mini
10: MiniTouner Express
11: My location is Bangalore, India
The SSB voice reception is good but i am unable to see DVB-S2 spectrum on the SDR program(while using SDRPLAY RSP1A).
The polarization switching is done by feeding 19 V to LNB via bias tee. Even after feeding 19 V , i could see only NB signal not WB signal. I tried HW and sw decode (leandvb@pabr,DVB-S GUI@Marko) of DVB signal (though it does not make sense)
I am not sure what i am doing wrong. Could some one help.