simple output power detector for 2.4G

  • Hallo all....


    after the infos about the nice cheap 800-2500Mhz directional couplers i spent some time to make me an easy output power meter ... for my qo-100 setups


    i found some information in the web about...


    https://dl6gl.de/book/export/html/192


    so i made an easy setup for testing the BAT62-03w and and a modified case from the ebay BIAS-T...


    what you need:


    2x100Ohm SMD 1206 resistor

    1x BAT62-03W

    some small SMD caps 10pf,1nF, 2.2nF.... 0805/1206


    optional an SMD-coil 33nH...


    as LEVELMETER will work any MULTIMETER or other INSTRUMENT


    look on the results at RF measurement S11 .... of the EASY SETUP ...

    it is looking good as an simple output and very cheap power detector for 2.4G


    EDIT and ADDITIONAL NOTE:

    THIS INFORMATION IS MADE FOR PUBLIC AND ONLY FOR PRIVATE USE.... NO RESELLING IS ALLOWED WITHOUT WRITTEN CONFIRMATION and INFORMATION TO THE ORIGINAL SOURCES.... !!!


    73 de Michael dg0opk