Assume you are using OBS Camera. No solution, 48 kHz vs 44.4 kHz. Unlikely to be fixed unless you modify the source code.
Assume you are using OBS Camera. No solution, 48 kHz vs 44.4 kHz. Unlikely to be fixed unless you modify the source code.Tu M
TU Mike
ik4idy , G0MJW : this is a info for all amateurs
datvexpress accept only directshow windows devices that are "visible" in your sytem.
so , after installing virtual cam (directshow) plugin for obs , datvexpress can see the camera and tx the video from obs.
when you choose obs-audio , there will be a warning that there is no audio grabber or actualy no directshow audio element.
if have been doing test with vb cable, voicemeeter, etc , was not working!
yesterday i maybe found a good solution?? go to audio settings pc , recording , deactivate your normal microphone
then activate the "stereo-mix" as standard device
leave the playback on normal speakers.
now open datv-express , and stereo-mix (microphone loop) will also be seen in the "live" and "audio"
restart datvexpress and transmit video from the virtual cam and audio from "steromix" virtual system
i is working on ic8ecf , have tx yesterday with this test.
can someone test if the audio is good ??? please give me a respons to this message.
just for info also, if you activate also your normal microphone , you can talk also in your tx video.
keep stereo device standard device and microphone communicate device then..
thank you. this message will be deleted if this is not a good simple working solution
many thanks nico
Hi Folks,
I would like to use the DATV-Express TX board with OBS over the LAN.
Would you please help me what parameters should I enter here?
73 de Robert
Yes, it works. Many thanks.
