DJ7TH nice design Rolf.. send me an email to call@darc.de with your phone number then I give you a call on this topic.
MiniMiniTiounerPro V2
-
-
278/5000
I am looking for a NIM type Serit FTS4335V or a compatible NIM for test purposes. The NIM may also be defective. I need the part to create a circuit board (MiniTiouner Pro replica) because of the mechanical dimensions. Possibly only on loan for a few days
The NIM mechanical dimensions are given in the data sheet. That's what I used to design my PCB and they were accurate.
Mike
-
G0MJW, Mike, of course, I used the Serit datasheets. Unfortunately, not all the required dimensions of the connector are shown there. Since I want to install the vertical mounting type NIM horizontally, I need this. The problem has now been solved. Thanks to the help of Heiner DD0KP, a NIM is available for test purposes
-
Guten Morgen Zusammen,
wo bekommt man den Mini Tioner Pro V2 her????
Hat von Euch jemand eine Internetadresse wo man Unterlagen usw. her bekommt???
Gruß Ulrich
-
https://boutique.r-e-f.org/kit…itiounerpro-avec-nim.html
Am besten über deren Online-Formular kurz Kontakt aufnehmen.
73, Thorsten
-
hallo Thorsten,
leider ist die Seite in Französisch und der Sprache bin ich nicht mächtig. Es sieht so aus als ob man dort Mittglied sein muss.
Gruß Ulrich
-
Also ich bin auch kein Mitglied der R.E.F. und habe dort einen gekauft und bekommen.
Adelaide, die das dort schmeißt kann auch englisch.
Wenn Google-Übersetzer nicht weiterhelfen kann, sieht's schlecht für Dich aus
73, Thorsten
-
I don't speak much french nor any German (sorry). I used Google translate and sent an email to REF in English and French asking to buy one. You don't need to be a member. Very efficient one communication was successful.
-
Ich habe da auch bestellt, war kein Problem. Mails habe ich mit Hilfe von google translate übersetzt. Bezahlt via Paypal und nach ungefähr 7-10 Tagen war der Bausatz da.
73
Elmar
-
Hallo zusammen,
scheint aber im Moment längere Wartezeiten zu geben, zumindest ist das dem Hinweis auf der Verkaufsseite zu entnehmen
73
Wilhelm
-
F6DZP wrote in the forum:
If you look at the MinitiouneConfig.ini you have something like:
; .......................................
[Display]
; OLED 1.3" : yes or no
; Digole 1.44" or 1.88" => Digole=14 // Digole 2.2" or 2.4" => Digole=22 // 2.6" => Digole=26 // NO Digole => Digole=0
OLED=no
Digole=26
That shows that you can use a 1.3" OLED or a Digole TFT LCD
hello help !! @DD4YR Robert I bought a bigger LCD 13 "128x160 and I connected LCL-SDA-VDD-GND I don't see any writing I modified your information MiniiouneConfig.ini like nothing you see photos there are other writings !! you can help in this LCD that I have been waiting for two months that came for conana virus
73 Tony IK1HGI
-
ik1hgi Tony Tony I think it is this one:
https://de.aliexpress.com/i/32955227773.html
So that is SPI interface and not I2C the controller is ST7735S.
You can uses this for an arduino but not for the MinitiounerPro. Sorry about..
-
ik1hgi Tony Tony I think it is this one:
https://de.aliexpress.com/i/32955227773.html
So that is SPI interface and not I2C the controller is ST7735S.
You can uses this for an arduino but not for the MinitiounerPro. Sorry about..
misery I was wrong !!! can I know LCD link for Minitiouner that I buy it thanks
73 Tony ik1hgi
-
ik1hgi Tony That is writen in the minitiouneConfig:
[Display]
; OLED 1.3" : yes or no
; Digole 1.44" or 1.88" => Digole=14 // Digole 2.2" or 2.4" => Digole=22 // 2.6" => Digole=26 // NO Digole => Digole=0
The OLED should be a 1.3" one with I2C interface
or more options with Digole as you see. Here one of the links for you:
-
Frankly, at the moment, I would install an OLED. The current software does not really utilise it yet. It is giving the same information you see in minitiouner so unless you really need to see this twice there isn't much gain. It's something for future extension. The much large colour OLED will be the one to have if you insist on early adoption.
Mike
-
Hat schon jemand von Euch aus dem Spektrum des Pluto (durch anklicken) die Frequenz in den MiniTioune pro übertragen können??
73 Ulrich