Hallo,
today, my new AMSAT-DL QO-100 DownConverter V3d: arrived.
I ordered in paralell also the shown 1.3" OLED.
When i tried to build the Converter, I realized, that the OLED is not has only 4 PIN´s, but the shown connector on the board has 2x 5PINs.
connecting the OLED as shown on the Pics seems to be impossible or "challanging".
Seems I missed something.
May I ask for some help?
I will connect the OLED on the Board directly, but later separate, mounted a box.
regards, 73
Gustav DL6SIX