hab mal einen Goobay 67269 geöffnet, da ist ein 25 MHZ Quarz verbaut.
Bilder von DL4PD Umbau auf TXCO mit Link auf TXCO Bezugsquelle wären hilfreich.
Vielleicht ist das ja möglich.
Goobay LNB 67269
-
Hi,
according to an article in the latest cqDL, we've ordered two LNBs from reichelt. With the cases open, we could see that they don't match the layout from the article, at all :-/
When powering it up, I cannot measure anything like 5 or 3.3 V, anywhere. Therefore we can see that the power supply is directly connected to the bug saying T101702 03 SD813 (see 2), which makes me think this device is directly powered with something from 12-18 V?! It has also has a connection to both ends of the xtal (3).
How can we modify this to a TCXO version? How do we get the correct voltage?
-
It is a TFF1017 and it has a 5V supply going in at Pin 16, which is in your picture on the bottom edge of the chip, left pin. You should be able to trace then its origin on the board, likely the chip #1 is generating 5V and the bias voltages for the preamplifier stages.
Edit: the #1 looks like the LS7005 as noted by OH2AUE in the GM-201 mod instructions. Then it should generate 5V at its pin 12, which on your picture is the left-most pin on the top edge.
-
-
DB2OS
Changed the title of the thread from “Help needed: modification of Goobay 67269” to “modification of Goobay 67269”. -
There are still 14 pcs. of goobay LNB 67269, offered by POLLIN at the moment.
https://www.pollin.de/p/universal-single-lnb-goobay-571167
73
Mike
-
For those who are interested in a LNB modification I can share a document with step by step instructions.
This is a mod for injecting an external reference signal over a single cable.
Here is the link: Mod-Documentation -
Another solution could be to use Goobay 67270 Twin.
More info in there
73 de ismo
-
DB2OS
Changed the title of the thread from “modification of Goobay 67269” to “Goobay LNB 67269”.
