Hello,
First please apologize if i am posting in a wrong place.
i hope in an help.
It is a while that i am encountering problems while receiving the QO-100 satellite. I am noticing that the modulation is not clear but it as if the voice vibrates. I have tried with both programs SDR Console and SDRSharp and both give me the same problem.
I thought it could be drivers problems or programs settings, i have tried to RX the QO-100's signal with a NEWGEN.RTL2832SDR Stick and the SDRSharp and i have noticed that the the Modulation is clear and without any vibrations as on the Pluto.
I cannot understand if the problem is actually the Pluto or if it could be something else like fore example the LNB or the LNA.
I have also made a video that is registered the QO-100's audio but cannot upload it on the forum as it is about 30MB.
If needed i can PM to how need it to understand the problem.
Please, Please anybody can help me to solve the problem?
Thanks in advance for any help that will be really appreciated.
73's de Enzo IK8OZV
N.B. Tonight i have made a test:
i have tried to TX with my Kenwood TS-2000X and RX with the Pluto and have noticed that if i TX in FM so the the
modulation is clear and understandable perfectly while if i TX in USB, i get the problem above.
If it can help to understand the problem.
Thanks once more