Adalm PlutoSDR USB Ethernet problems

  • I can't use the network USBs I bought several, but there is nothing to do, the USBs work and have a compatible chip, sometimes I see the Pluto on the network but I can't ping it. I changed the network cables and replaced at least 5 USB V connectors to power it, but they are still at the same point.

    Someone is able to help me, maybe I am doing something wrong.

    Thank you

  • ik2rlm

    Changed the title of the thread from “Adalm PlutoSDR” to “Adalm PlutoSDR USB Ethernet problems”.
  • Ciao Ulrich,
    yes see my config.txt


    # Analog Devices PlutoSDR Rev.B (Z7010-AD9363)

    # Device Configuration File

    # 1. Open with an Editor

    # 2. Edit this file

    # 3. Save this file on the device USB drive

    # 4. Eject the device USB Drive

    # Doc: https://wiki.analog.com/univer…s/pluto/users/customizing


    [NETWORK]

    hostname = pluto

    ipaddr = 10.20.1.1

    ipaddr_host = 10.20.1.2

    netmask = 255.255.255.0


    [WLAN]

    ssid_wlan =

    pwd_wlan =

    ipaddr_wlan =


    [USB_ETHERNET]

    ipaddr_eth = 10.20.1.3

    netmask_eth = 255.255.255.0


    [SYSTEM]

    xo_correction = 40000000

    udc_handle_suspend = 0

    # USB Communication Device Class Compatibility Mode [rndis|ncm|ecm]

    usb_ethernet_mode = 0


    [ACTIONS]

    diagnostic_report = 0

    dfu = 0

    reset = 0

    calibrate = 0


  • In addition to this I do not understand what the USB Ethernet IP that I put as 10.20.1.3 can be used for, if then it always and only takes the IP of the HOST 10.20.1.1
    Maybe I need to put 1 in usb_ethernet_mode = 0

    ??