Adalm Pluto SDR + SDR Console Remote

Of course. Just use a Pluto on your network and connect with WiFi at 5 GHz. I do this all the time. If narrow band, best limit the bandwidth. If DATV lower SRs are better, but in 2021 there is really no need to run 1Ms/s.

Mike

It occurs to me some people may not know how to do this. You need an OTG Ethernet adapter and a Y-cable for power. Don't try to power from the Pluto, it may work but often doesn't, at least not reliably. Pluto will use DHCP to get an IP address from your router. Find out what it is and enter it in SDR Console. Set up will look something like this highlighted:

The difference is the IP address.

Mike

As Mike pointed out operating the Pluto via the LAN is no difficult.

Here is a decription:

Connecting the ADALM Pluto to the Local Area Network

Kind regards

Matthias

http://www.dd1us.de

It is but not normally a good idea. It is possible with a VPN but you need a very good stable connection for it to work properly.

Mike

Hi,

Also consider the bandwidth required. If I remember correctly 18 MBps is required for 1 MHz at Pluto.