MiniTiouner Hardware (F6DZP)

Hallo Alessio,

for 2yers BATC Membership you pay 17,52 €. You can buy in the shop ans download CQ-TV a very interesting Magazin.

73 Hans-Jochen DK1MG

Ciao Alessio

Look also for MiniTiouner- Express at https://www.datv-express.com/

73 FCosta, CT1EAT/M0HOJ

DIY MiniTiouner

TEST OK

I bought two FTS - 4334 lv. Using universal circuit board made a MiniTiouner v2.Is easy to succeed.Thank you for all the people who create MiniTiouner.Is you let me feel the infinite pleasure.

Can you tell the source for the FTS- 4334 lv to buy ?

BG0AUB do you have narrow band possibilities to uplink towards the satellite at 2400 MHz ?

DL4SAC e.g. at BATC with membership also there PCB and special components

https://wiki.batc.org.uk/MiniTioune

Quote from zhaofeng

DIY MiniTiouner

TEST OK

I bought two FTS - 4334 lv. Using universal circuit board made a MiniTiouner v2.Is easy to succeed.Thank you for all the people who create MiniTiouner.Is you let me feel the infinite pleasure.

A lot of design work there - I could have sent you the Kicad files for the V2 PCB which wold have saved you having to make all those new footprints. Still it's done now. I think it would be useful to add some features in a V3 based on what we have learned in the last couple of years. Move the FTDI chip to the board rather than use a plug in module. Add some switching to the IO. Enable both tuners at the same time. Revise the PSU. Header for OLED. Perhaps even do the 22kHz stuff

G0MJW Can you tell me how to select LNB port B as default in the ini file of Tioune??

The "father" of all Minitiouners is Jean-Pierre F6DZP. He has designed the schematics of the Minitiouner and developed the Minitioune software. He should release soon a new version that takes into account the requirements for easy operation with
QO-100. Visit his site (forum) : http://www.vivadatv.org If you register, you can download the new Minitioune version when available, and also make your comments. There is an English section. See also this page : http://www.vivadatv.org/tutioune.php?what=map You can see the installed base of Minitioune around the world (for those who have filled in the Minitioune.ini file the OM_ID (call) and Forumpassword (the password you use after having registerd to the site. Hope this helps

@Heiner : LNB port B by default is an option that is not (yet) implemented. You can ask F6DZP if he would add this option, if for you it is a must have ?

73 - Christian

F1FAQ thanks Christian..I also figured out in between..

Hmm... Port B works for me without any problems with v0.8 software.

yes.. here as well.. but you can´t configure this on startup in the ini file

Quote from Remco

[user ='250'] zhaofeng [/ user]你是否有能够以2400 MHz频率上行卫星的窄频带？

SDRangel+LimeSDR+2.4G PA

Quote from DL4SAC

Can you tell the source for the FTS- 4334 lv to buy ?

I emailed SERIT manufacturers.Received enthusiastic response.And bought two FTS4334LV..You can try

haisen@serit.hk

Sales Manager

HONGKONG HAIFEI ELECTRONIC LIMITED (香港海飞电子有限公司）
FLAT112,1/F,BLOCK T3-B,SHENZHEN SOFTWARE PARK,GAOXIN AVE.7.S,HI-TECH INDUSTRIAL PARK,NANSHAN DIST,SHENZHEN,CHINA
TEL: 86-755-26508927/26504227/26505315
FAX: 86-755-26505315
MOBILE PHONE: 86-13684913317
QQ: 318446387

Skype:haifei serit

www.serit.hk

I found an old aluminum mobile hard disk box, and made a panel, used for circuit boards.Can be the perfect job now...

Maybe it is easier for you because you are from China as well...

I normally get no response when mailing far-East companies with enquiries about products or request for datasheets in English language. (at different companies)

However this is an interesting part. I still have a Dream Multimedia DM-8000 which has plugin slots for extra tuners. I could try to get such a tuner work in that box, would be much more convenient that viewing through a PC.

Quote from pe1chl

Maybe it is easier for you because you are from China as well...

I normally get no response when mailing far-East companies with enquiries about products or request for datasheets in English language. (at different companies)

However this is an interesting part. I still have a Dream Multimedia DM-8000 which has plugin slots for extra tuners. I could try to get such a tuner work in that box, would be much more convenient that viewing through a PC.

Each other.Each other...



When I supplier of China no longer, I treated the same as you...Ha ha