Hi all, I am trying to get my first QO100 station working. I attach above pictures. I can hear the CW beacon just, but almost no SSB activity. I can point the dish using the very faint signal, I am happy it is in the right direction. I can also do the same for skew. I replaced the 75 ohm coax with some M&P coax which helped a little. I replaced the coax link from the Pluto plus to the power injector and also the output one also. SDR software will beacon track ok, the two lines are quite faint however. I appreciate the dish is quite small - I did try the slightly larger one, but the improvement was marginal at best. Any help gratefully received.
