Keep It Simple and Stupid (KISS) so we don't end up with a GUI crowded with too many options... Patch.zip is there for these additional options.
No, that's not how I see it.
Patching only creates additional effort and problems .....
Robert
Keep It Simple and Stupid (KISS) so we don't end up with a GUI crowded with too many options... Patch.zip is there for these additional options.
No, that's not how I see it.
Patching only creates additional effort and problems .....
Robert
With such a cheap attenuator I adjusted the RX level for my FT-736 S-Meter ....
[Blocked Image: https://www.pollin.de/images/1600x1200x90/I570532.1-SAT-Daempfungssteller.jpg]
73´s de Robert
Hello everybody,
I have found the cause of the irregular behavior in the frequency transfer: My brain: operating errors ....
If the entry for Transverter LO is not set to No TRV (e.g. Custom) then a value must also be entered, otherwise there is no frequency to take over ....
I just overlooked it.
My mistake...
Sorry for the effort I put in ...
73's de Robert
Easier way of updating a firmware is using the web page
... did not solve in my case. I tried this first.
some old waste files will be not deleted during this process ...
I think it will be usefull if there is a routine installed which removes all not necessary files from old versions from the PLUTO before reinstall ?
Roberto,
problem solved. I flashed back to an old pluto.frm from dez. 2019.
The agn the actual pluto.frm from yesterday.
Now the frequency takeover is ok.
maybe some data waste in the folder ...
tnx for your help
73´s de Robert, DD4YR
Update: Have now both PLUTO in the Shack, firmware update via USB Port.
On one the frequency takeover is ok. on the other PLUTO it did not work.
73´s
de Robert
Hm, now an other try...
on my shack Pluto (also Adalm 0.31) connected via USB, pluto.frm installed via USB is working correct .... !
On my DAVB PLUTO near the dish, connected via Ethernet, pluto.frm installe via the ADALM-PLUTO DATV Controller did still not work correct.
Any Idea?
73´s de Robert
Second installation did not solve the problem ..
Im still on Pluto Firmware 0.31
Maybe this will be a problem?
I´m in concact with DD0CW this moment, he observes the same problem.
Restart PC, Pluto also done ....
still no frequency takeover
73s
Hello Roberto, tnx for the hints, but still not work.
I tried all, deleted also the cookies and cashes.
frequency takeover from the right window does not work.
Still NaN as result ....
I use chrome as standard, tried also with firefox, same result.
73´s de Robert
yeeeees this would be great!
tnx all, running ...
Roberto, it would be great if it was possible to to set the power slider below the PTT button line during the next updates....
The power slider is one of the importent contents after the PTT button, and has to be always visible with the spectrum in a small window.
thanks and 73´s
de Robert, DD4YR
out of stock ....
take a look in ebay, there is a seller in the Netherlands ...
upgrade from 0.31 to 0.32
Is that even necessary, and if so, what are the benefits?
73´s de Robert ....
Hallo Henry,
das schaut so aus als ob der Skew Winkel nicht stimmt.
Bei 18V (H) am LNB drehen bis die NB Signale minimal sind.
73 de Robert
Hello Roberto,
you find it! Now it works without problems
Thank you very much for your great job!
73´s de Robert
Yes,
I've already removed the first line, but the streaming still doesn't work ... .- (