Hi all. The software is working quite well with a NOOELEC sdr stick and a 80cm dish. Signals must be nearly as strong as the beacon to decode. So far I am able to decode 1500ks to 250ks in QPSK. This software is great for getting started in DATV on QO-100.
Posts by DL9DAC
-
-
Thanks to Michael DL2FW I was able to solve my IP connection problem with the HS Modem software. He sent me a different libliquid.dll that I exchanged in the main folder. Now the software is working.
If anyone else would like to have it, send me an e-mail. My address is neugebauer.hagen@web.de.
73 de Frank DL9DAC
-
So far I have the same log until it stops at init FFT and then loses the IP address.
-
Unfortunately the new version is still not working here. I have the green hooks showing me that the audio settings are ok, but Modem.exe and Oscardata.exe seem not to be able to connect via IP.
-
Good morning everybody.
I have the problem that although the audio settings are marked ok with the green arrows, the IP adress shows up twice for about two seconds, then changes to red again. Firewall settings are ok.
-
-
I have found out who is responsable for these transmissions in CW, SSTV and KG-STV on QO-100 and other satellites like SARCOM and FLTSATCOM, etc.
He uses or has the callsign EA7KJW on QRZ.COM.
He has also used EA7JKW, EA7PP, VB7EE, FL5DD, AA1RX, ICOM, etc.
Francisco Diaz Montano
Calle La Palma
El Puerto De Santa Maria 11500
Spain
EMAIL: fdiaz_montano@hotmail.com
Here are his Facebook pages:
https://www.facebook.com/francisco.diazmontano
https://www.facebook.com/profile.php?id=100013368636501
-
-
Hello Flo. You must right click on the modes and a list will open in mmsstv with all the other modes which you then can select.