Posts by ik4idy
-
-
-
brr there's too cold to finish my plant for Es'hailsat...Rx Dish ready but I'm not Santa, and is better avoid to have flu... I hate snow !
-
Hi,
I also wrote an email to them a few days ago asking for LHCP and a slight shift of the frequency. Let´s wait for the answer.
Here the direct link to the antenna (last one on the page):
The helix normally is a very wide band antenna. This ant may be suitable for 2400 MHz. Okay is better to have an optimized helix, perfectly centerd on our band. But we told about 50 Mhz. with helix, not so far from our 2400 Mhz, isn't it ?
Alex
-
For those of you who want to buy an uplink antenna for a dish off the shelve I recommend the antenna from Winkler: http://www.winklerantennenbau.de
38,70 Euro plus S&H
Wrote an email today, hope they'r able to read my questions, thanks. Regards.
Alex
-
-
Charly,
cannot see at the link you posted. There's something wrong.
Regards.
Alex
-
Ok guys this means that the bird is nearest to his final destination.
I take a note.
Thanks.
A.
-
Hi Peter,
before all thank you for your nice job with the Amsat-Dl team, about effort to bring us in space. There's a growing enthusiasm on the capability of the new satellite, for the ham-sat community. We're all hungry of news (hope in good news), and for this reason someone, sometimes exceed in the requests (I'm in this group ).
Anyway it's necessary to be patient and i strongly suggest to my colleagues to respect sat guidelines, appeared in the forum and in Amsat-DL pages.
Thanks again for your effort.
Regards.
Alessio
PS And thanks also to QUARS for the hospitality.
-
Ciao Alessio
Look also for MiniTiouner- Express at https://www.datv-express.com/
73 FCosta, CT1EAT/M0HOJ
Tu ! 73.
-
Hallo Alessio,
for 2yers BATC Membership you pay 17,52 €. You can buy in the shop ans download CQ-TV a very interesting Magazin.
73 Hans-Jochen DK1MGTU 73 !
-
Hi,
Do you refer to Amsat beacon or Engeenering beacon of Es'Hailsat-2 related to the control of the satellite ?
10,489.550 GHz Is the Amsat Narrow band Beacon frequency (almost nearest to this), of one beacon.
Regards.
Alessio
-
Dear WB-Users,
I searched a channel to buy MiniTioune, Hardware from F6DZP, but it's necessary to be a member of BATC or REF.
Is There a channel to buy hardware avoid to be a member of one organization ?
Thank you very much for the reply.
Alessio
-
Hi, are you sure is Hailsat-2 ? May be another sat beacon in the same position.
73 Alex
-
Lucio, I remember an article (may be I8CVS RIP), about this argument. He said that "the position of the LHCP feeder is with the corresponding focus, on the plate reflector of the helix ant". The right place may be # 2, and is more simple to manage, for the installation.
In my opinion the difference in gain between the two configuration are irrelevant, but only an istruments can get punctual measure about it.
Regards.
-
Thanks for the reply.
-
Dear friends,
there's a discussion about the SAT receiver about the capability to receive RB DATV signal from the trasponder.
After i have been watched BATC CAT 16 Video's by jean Pierre Courjaud, for me it's clear that under 1 Ms rate, a standard receciver has problem to receive, isn't it ?
In this case the best solution for receive RB signal is MiniTioune SW combined with the dedicated receiver.
I just need a confirmation about it.
Thank for reading and for your answers.
Regards
Alessio
-
Hi dear,
seems all ok, congratulation to Space-x for the successful launch, and thank you very much to all the amsat-dl team, for their effort to bring us in space.
This is a very beautiful night for all satellite radio-ham !
I'm looking forward to do my first QSO on P4A !
Best regards.
Alessio
IK4IDY