Karen,
Regarding IC-9700 & IC-R8600
I found this on the WEB:
http://www.reeve.com/Documents…apers/Reeve_10MHzDist.pdf
On page 8 talks about BG7TBL Distribution Amplifier.
On ebay it's available with OCXO installed:
https://www.ebay.it/itm/10MHz-…ksid=p2060353.m2749.l2649
what do you think about it
Have you any other suggestions?
Claudio
Karen,
I agree with you about Si5351.
What do you think about ICS512 (5MHz to 10 MHz) as reference for IC-9700 and IC-R8600?
Claudio
Karen,
thank you very much for your reply.
I was thinking of generating 25 MHz with ICS512 from the source of rubidium to drive an Si5351.
Si5351 would generate MHz 25.78846154 to be used as an external oscillator for an LNB.
I'm starting to believe it's not a good idea but I don't know what other solution to use.
The other ICS512 should generate 10 MHz to be used as a reference for IC-9700 and IC-R8600
But even this doesn't seem like a good idea
Claudio
Benno,
I read in your post "IT works fine with gpsdo from a local ham"
I have a question:
which model is the gpsdo you used?
73 Claudio
Hi,
I was thinking of using two ICS512s to make 10 MHz and 25 MHz from the 5 MHz of an HP5065A Rubidium Vapor frequency standard.
Now I read that ICS512s is not recommended.
Any other solutions?
Thank you
