Hi Manuel,
Short answer for you :
1) 0201 firmware or perseverance firmware 0303
2) https://www.f5uii.net/en/patch-plutodvb/
3) PlutoDVB Patch Detection Hardware Revision firmware 0201.zip or PlutoDVB Patch Detection Hardware Revision firmware perseverance 0303.zip
4) same link as given before at 2
5) Step 3 : https://www.f5uii.net/en/trans…m-pluto-f5oeo-plutodvb/5/ and then upload simply the patch.zip file under "Upload a new firmware or new patch"
Hi,
A new Patch UII2.4 is available
Right click on modulator profiles, gives 4 features:
Only to be install on 2711 alpha firmware.
Hello,
This UII2.3 patch is now included in a alpha firmware version: https://www.f5uii.net/en/patch-plutodvb/#download
On this version, the analysis page does not only show the PIDs of the transmission, but also the PIDs of the reception.
We are now working on the restitution of images capture of reception coming from the minitiouner.
An overview is available on the analysis page
To be continued
To announce you this time a new patch (UII2.3) which brings these new functions:
After some days of feedback and then maybe correction, it is likely possible that a complete firmware will be available soon.
Your remarks and feature ideas are welcome on
Hello,
The patch is now included in a compiled 2110 firmware. Thanks to Evariste F5OEO 
.
You can download the frm file on the same page.
Hello,
Just to announce the latest patch updates to allow the steering of a minitiouner from PlutoDVB (alpha 2908) and the generation of the RMTP URL, which will be able to be copied directly in OBS Studio or Vmix.Nice tests. Your remarks are welcome directly in comments on this page.
Hello to all,
The next version including the spectrum masking but also the possibility to drive a minitiouner will be released soon... Here a demo in video
Don't forget that it is a short circuit development... I mean there can always be bugs and omissions.
Don't hesitate to share your comments and wishes... A blog page available for this purpose .
F5LEN DX Cluster
http://cluster.f5len.org/index.php?what=qo100
und für mobile Geräte : http://cluster.f5len.org/mobile/index.php?p=qo100
Hallo,
Pluto have no GPIO but only GPO.
Ethernet "transit" times should not be confused with the switching delay. The relay switches as soon as the Adalm Pluto is transmitted in a few tens of milliseconds or even less depending on the software method implemented. See details on this Wiki Analog Device steering Power Amp page.
Here's a well-known tip for those who don't like to use the mouse to turn SDRConsole in transmit : Press the F5 keyboard key.
Another possibility: a footswitch connected to the serial port of your PC. Details on https://www.sdr-radio.com/ptt
Hello,
For those who might be interested, I pass you the information on this board to be integrated directly into the pluto's case and which provides 2 independent and isolated PTT outputs of 0.5A. It exploits GP0 and GP1 commands and totally works with SDR Console and PlutoDVB from F5OEO. So no USB configuration to do.
Here some pictures of the board integrated in the PlutoSDR
1. Yes for meet all of you at Hamradio
2. No, out with others good friends ! Maybe not far from the greek restaurant
#Phase4A Beacons
on 10450 = -64dBm => 26dBm/SNR
on 10500 = -76dBm => 14dBm/SNR
What explains such a difference in the level of the two beacons? Do others see the same situation ?
The noise stay alike -90 dBm, at the bottom and top of the transponder band. Idea?
Using Octagon Oslo LNB LO 9750Mhz on 1.2 offset dish.
Hello,
I saw yesterday afternoon, the Phase 4A the 2 beacons appearing.
Signal louder on 10500 than 10450, on my side.
SDR capture here : Twitter / @f5uii
