Posts by DM6CS

    Hi Chris,

    I am using a LimeMini together with SDR Console v3.0.25 on a 64 bit Windows 10 system.
    With my system, there is no problem to transmit several times. So I cannot confirm your observation.

    Also I upgraded recently from 3.0.24 to 3.0.25 since I expected better performance of my LimeMini. Unfortunately not much has changed.
    Especially at 2.4 GHz the signal quality is very bad. Carrier and image supression in SSB is only 30 dB below the carrier. "TX Calibrate" helps a little bit, but during the next TX round all is gone and the signal is as bad as it was before.
    BTW, I do not use Transmit Offset Tuning; this help to get a cleaner signal at 2.4 GHz, but you now produce a lot of spurious away from the carrier.
    So honestly, I am considering to use an Adalm Pluto in the future...

    73 Chris DM6CS