Posts by DD0KP

PH2M also looks nice...

DL2NED So back from work..here my answers for you.

1. Arduino Uno plus LCD Keypad Shield together around 12Euro look for good prices on Ebay.

2. The program I can share with you by email just drop me a mail dd0kp@darc.de

3. I did a small interface to I2C with a PCF8574

4. You need in addition I2C extenders for your cable length look this link:

https://www.hackster.io/chipmc…-and-inexpensively-ea6b53

5. Best you use a simple Ethernet cable for Vdd, GND, Clock and Data lines.

then it should work remote from your shack.. regards Heiner..

W5NYV I will keep my fingers crossed for you..

DL2NED there are possibilities to do this.. I will answer you in the evening leaving to work now..

I got a shipment notice yesterday for my PA I ordered.

I post your notes at batc wb chat.. to keep all tuned..Heiner..

Thanks Peter for your post.. please ad it also in the batc wb chat.. many people are quite nerveous at the moment...

That are the drivers from the andrews ´s PAs.. should work perfect as well..

If have this one and it works very good..

I got my AX Black Buster today. was recommended by DG0OPK works perfect, shipment from DL but now out of stock.. Here the link again for those who are interested:

https://www.ebay.de/itm/AX-Bla…a66b7f:g:WyQAAOSwg31ahPWo

dl4yhf Wolf..posting pictures e.g. use Hardcopy nice programm which allows screenshots from areas of the screen.

pe1ckk Thanks for your announcement..

then I will post my results here..

Yesterday there was a qso on the nb transponder from IW1EPY using Adalm pluto for SSB. The sound was very clear. This I will try as well in the next few days just to have this experience.

I bought two of these.. looks very straight forward the design. The bias voltage could be set via I2C pads. and also the price is very good.. There are more available..

Hope next week I can post first results here..

DK1MG Hans please send me your screenshot with Minitioune SW for the beacon connected to the Amsat Converter. Then I will check. But as I remember you are not the only one having difficulties on this.

Here are the settings for you:

First duplex tests on the WB Transponder:

DC3MS I will check..we had this here in the forum before..try to find that post..