Posts by DD0KP
-
-
DL3ED Ulrich...they are called P-SMP
-
HB9EKO Jens, here the contact info of the ebay seller:
https://www.wlan-discount24.de…tantenne-Wetterfest-19dBi
the shop price is higher than ebay.. but you can ask there tomorrow shipping to swiss.
-
HB9EKO Jens I found the one I posted for less than 20 Euro plus S&H in Ebay. yes there are OMs using this for uplink. your power is no problem. for that antenna. I think for that price you should try.
-
HB9EKO Jens may be this antenna for transmit could solve your problem if you mount it stand alone:
-
ON7CL I recommend for LNB using Opticum Quattro LRP-04H. There H and V are on seperate plugs and you only need 12V to supply no addition 18V to switch the polarisation. the dongle recommandation from Luc is ok. you can also search for NOOelec dongles with TCXO inside.
-
ON7CL Rudi if you do it also with your FT-818 you have no duplex possibility. So I recommed you better using SDR Console with an SDR dongle for receive aund do the TX synchronisation with the external Radio function of SDRC with Omnirig. Then you can hear yourself back over the satellite.
-
Drop me an email call@darc.de and i will reply with my phone number.
-
Wilfried I recommend this set. we also use for the school stations.
https://www.ebay.de/itm/Opticu…nehmer-HD-TV/352158549221
and for easy mountion I recommend:
https://www.ebay.de/itm/Sat-Ba…e3856f:g:CJ0AAOSwdIlbm2r6
Then you only need a sdr dongle a bias tee and some sat cable. thats all.
-
here it works with the new VLC version.
-
Tony there was a VLC update for both versions this week. May be that is the reason. I will check and post my results later..
-
May be in this threat is some help for you:
-
DJ7WL und hier die Beschreibung zum GPS Modul:
-
DJ7WL Select Radio...Converter Selection...Edit.. und dann down-converter mit 9.360.000.000 eingeben...speichern.. und dann starten.
Danach oben links einfach die richtige qrg eingeben vom NB und fertig.
-
DJ7WL Joachim, auf der Seite von Kurt ist das genau beschrieben:
https://www.helitron.de/dj0abr…nik/sat/amsat_down_v3.htm
bei 24MHz die du eingestellt hast ist deine Berechnung richtig.
-
ik1hgi Tony That is writen in the minitiouneConfig:
[Display]
; OLED 1.3" : yes or no
; Digole 1.44" or 1.88" => Digole=14 // Digole 2.2" or 2.4" => Digole=22 // 2.6" => Digole=26 // NO Digole => Digole=0
The OLED should be a 1.3" one with I2C interface
or more options with Digole as you see. Here one of the links for you:
-
ik1hgi Tony Tony I think it is this one:
https://de.aliexpress.com/i/32955227773.html
So that is SPI interface and not I2C the controller is ST7735S.
You can uses this for an arduino but not for the MinitiounerPro. Sorry about..
-
EA2ARU this could be a solution for you: https://boutique.r-e-f.org/kit…amplificateur-24-ghz.html
-
EA2ARU yes it is, but you need a small PA in between the Pluto and the SG-Labs one.
-
Regarding Scan&Tioune look into the manual. Now there is an english version available: