Posts by ik2rlm

  • SDR Console & Pluto+

    Tnx iu4gav & Martin, I tried but nothing changes.
    Andrea, ho visto la tua installazione, non è che per caso mi potresti assistere direttamente quando hai tempo.
    Perchè adesso sto sistemando il software e cercando di capire come funziona, ma poi tocca al trasmettitore e la trafila diventa lunga da matti con il sistema del forum. Se avessi la tua cortese assistenza farei molto prima a mettere on-air l'albania su qo-100.

  • SDR Console & Pluto+

    I rebooted at least 5 times, and the 6th time it worked, but I don't know how that could have happened.

    In any case, thanks for your support.

    Now I have to fix the frequency, I receive the beacon at this frequency.

    What do I have to do to center it exactly, to center it on 10,489,750 ?

  • SDR Console & Pluto+

    I rebooted at least 5 times, and the 6th time it worked, but I don't know how that could have happened.

    In any case, thanks for your support.

    Now I have to fix the frequency, I receive the beacon at this frequency.




    What should I do to center it exactly, other than waiting 1 hour for the temperature to stabilize?

  • SDR Console & Pluto+

    Hi Martin, checked but no change, I receive everything using 740Mhz with very good signals.

    But the displayed frequency does not change ranging from 99,000 to 10,000,134

  • SDR Console & Pluto+

    Hi everyone,

    I'm trying to setup for QO-100 using Pluto+, and SDR Console.

    I can't get the correct frequency despite having set the correct values in the down-converter section.

    The frequency that is displayed on the SDR Console ranges from 99.900 to 10.100 Mhz.

    Where did I go wrong?

    Thanks in advance.


  • Adalm PlutoSDR USB Ethernet problems

    In addition to this I do not understand what the USB Ethernet IP that I put as 10.20.1.3 can be used for, if then it always and only takes the IP of the HOST 10.20.1.1
    Maybe I need to put 1 in usb_ethernet_mode = 0

    ??

  • Adalm PlutoSDR USB Ethernet problems

    Ciao Ulrich,
    yes see my config.txt


    # Analog Devices PlutoSDR Rev.B (Z7010-AD9363)

    # Device Configuration File

    # 1. Open with an Editor

    # 2. Edit this file

    # 3. Save this file on the device USB drive

    # 4. Eject the device USB Drive

    # Doc: https://wiki.analog.com/univer…s/pluto/users/customizing


    [NETWORK]

    hostname = pluto

    ipaddr = 10.20.1.1

    ipaddr_host = 10.20.1.2

    netmask = 255.255.255.0


    [WLAN]

    ssid_wlan =

    pwd_wlan =

    ipaddr_wlan =


    [USB_ETHERNET]

    ipaddr_eth = 10.20.1.3

    netmask_eth = 255.255.255.0


    [SYSTEM]

    xo_correction = 40000000

    udc_handle_suspend = 0

    # USB Communication Device Class Compatibility Mode [rndis|ncm|ecm]

    usb_ethernet_mode = 0


    [ACTIONS]

    diagnostic_report = 0

    dfu = 0

    reset = 0

    calibrate = 0


  • Adalm PlutoSDR USB Ethernet problems

    I can't use the network USBs I bought several, but there is nothing to do, the USBs work and have a compatible chip, sometimes I see the Pluto on the network but I can't ping it. I changed the network cables and replaced at least 5 USB V connectors to power it, but they are still at the same point.

    Someone is able to help me, maybe I am doing something wrong.

    Thank you