Posts by f6bir

Very nice Ben, thank you for reporting

73, Rene F6BIR

Hello Jean

Thank you for information here I use a small 60cm dish for the beacon Raspi and Dxpatrol are both GPS locked.

73 Rene F6BIR

Hello Matthias and Edson

Nice reporting with your 1.8 device 5dB more !

I saw you received also DJ0VL i will listen that new beacon

Have a nice WE, GL with satellite

73' Rene F6BIR

Hi Edson

Working very nice.

73' F6BIR

Hello Edson

Thank you for reporting from Brasil,

What is your receive equipment.

Here i am using Pi-A+ with DXpatrol only, antenna helix 6tr /60cm offset dish for transmit beacon H/24

Have a nice day.

73' Rene F6BIR JN19cf 50km north of Paris

Hello listeners

The WSPR beacon is always active on the same frequency ( tune on 10489.568 ) duty cycle 4 minutes

TX (Raspi) and Up-converter (DXPatrol) all GPS locked , SNR =~ 17db, drift < 1s.

Thank you for reporting.

73' Rene F6bir

Hello Frank

Good idea i will be qrv for test JS8 call on that frequency.

I am already running wspr bcn gps locked on 10489.568.000 50% duty h24 7/7 (1500Hz mod)

73' Rene f6bir@sfr.fr

Hello Guntram,

i'm very happy to know you received me and decoded on QO-100, thanks for the report

have a nice day

73 Rene

the power output is now 100mW

Hello

Thank you for your answer, to be able to decode the WSPR you need a stable reception of -+2Hz per minute, which seems to be the case with regard to your screenshot, otherwise you can try by listening to the WEBSDR from http://websdr.is0grb.it:8901/

have a nice day

Rene

forum.amsat-dl.org/cms/index.php?attachment/6060/forum.amsat-dl.org/cms/index.php?attachment/6061/

Hello
I'm running a beacon wspr on the NB QO100, the frequency carrier is 10489.568Mcs, the power output is around 50mw in a 6tr helix antenna/80cm offset dish, the TX is a raspberry device PI_A+, her clock is locked GPSDO, the WSPRPI software generates on 28.069500Mcs a WSPR msg , wich is sent to a locked DXPatrol up-converter input, the output is connected to the helix antenna without any amplifier.

What could be the right freq to use and also how could we report the spot from the listened beacon on wsprnet.org knowing that there is no band know for QO100

Actually I use 2400,068Mhz working frequency in WSJT-X to spot the datas , this band is unknow by wsprnet.org but it spot my datas.

You can watch my spots : http://wsprnet.org/olddb?mode=…r&findreporter=&sort=date
Regards

Rene F6bir.