Question: Which Version of the RPi 4B do you prefer ?
tnx info
herbert
Question: Which Version of the RPi 4B do you prefer ?
tnx info
herbert
Hi Michael,
try to use SDR-CONSOLE > https://www.sdr-radio.com/
if you are using a LNB with PLL you can use the Frequence-Drift Correction Option
73 es gl
herbert
dl4sdr
Does someone using an ICOM IC-7000 as a control transmitter 70/13 cm ?
Would like to get some Information
tnx in advance
herbert
dl4sdr
mit SDR-Console Version 3.0.7, die mit der DRIFT-Korrektur, sollten PLL LNB's gut funktionieren
nur geringer "hub" auf nahezu allen Aussendungen...wurde viel im Netz darüber berichtet
Which Capacity do you use for connecting the x-tall ?
It is a bandpass 1.6 - 32 MHz. Ordner Number 12440. Two of them are cleaning the signal.
Hmm...not the cheapest way...tnx info
......I have used two low path filters from WIMO do clean the signal. I have now a clean Sinus wave.
WHICH ONE do You use ?
tnx info
is there any information when version 3.0.7 will be released ? I do not need the fix for the pluto so a betaversion woul be appreciated
@ DH5DAX and others here:
...and feed it onto one of the crystal pads via a ~100pF capacitor.
I am a little bit unsure because in Article cq-dl 1-2019 there is written:
and feed it onto one of the crystal pads via a ~100nF
Is the difference critical if i use a GPSDO e.G. Leo Bodnar ?
Is there a solution to modify an OCTAGON OTSLO CHARGE 1208/1301/1306 RDA3565ES 27Mhz WITHOUT unsoldering the quartz crystal ?
e.g. Stabilizing with 10Mhz GPSDO
I Have one but not so certain unsoldering the crystal
Tipp: If you want to read CW SIGNS "only" with unmodified LNB you can use HDSDR software which has a funktional AFC Mode (not available for SSB )..heard this in a qso 30 Minutes before.
Actual figured out and it works
Found the same function = CW AFC = in SDRuno Software. But there is a slow drift so i think i must read in the maual.
....wenn ich denn noch der französischen Sprache mächtig wäre
With WINRAR 5.60 (64-BIT) it works on my WIN7PORFMachine
Hello
.........but right now there already are stations that use something like the ADALM PLUTO with a small 13cm pre-amp and a WiFi booster as a final amp, requiring at most some filter for really clean signals.
Where can i find more Infomation using an ADALM PLUTO for TX ing to QO-100 ?
tnx
herbert
again...amazing could not believe this:
https://www.hamdigitaal.nl/author/pa3pm/
Took my second LNB = Megasat TWIN Diabolo...hold it out of the window to the known
AZ/EL AND LISTENING low ssb sigs ! (Green SDR Stick /rpi3)
Great Job !
73
herbert