Its time for leila to start working.
Many stations with far to much pwr on the uplink
73s DB8TF
i am surprised how ignorant the HAM's are who working with faulty parameters
Its time for leila to start working.
Many stations with far to much pwr on the uplink
73s DB8TF
i am surprised how ignorant the HAM's are who working with faulty parameters
This wiki could be helpfull.....https://wiki.batc.org.uk.........go to ES'hail-2 getting started
55
herbert
For me who has only small experience with LEO Sats it is amazing listening with "simple" equipment all the signals including the qrp station's. GREAT JOB done by the whole Team. Congrats and may be meet u on QO-100 in the near Future
73/55
herbert
dl4sdr
60cm Dish; Octagon unmodified LNB; RTL-SDR & Adalm-Pluto
here in JN49 Square using a 60cm dish with PLL LNB and rtl-sdr Stick...good copy
gl es 73
herbert
i think my cw "test-Sigs" will not bother ...- ...- ...- -.. . -.. .-.. ....- ... -.. .-.
if i will be qrv; will listen first if i can become qrv (never had TX-GHZ equipment in m y shack)
73
Hope you understand a question from a "newOne".
Is it important to check the own transmission signal using own "stuff"?
I think i can read the quality of my tx-sigs listening on the RX signal coming from the satellite.
mni tnx for your information
herbert
-most of the time qrv in CW-
10 db over noise with OCTAGON TWIN / Nooelec/60cm Dish in jn49vl
Great to see it works
i see no difference between RTL_SDR V3 Stick and a NooElec Stick.
Using RPI3+/GQRX with unmodified OCTAGON TWIN LNB an 60cm Dish
73
herbert
Never had contact with GHZ Receiving i took the chance to figure out how it works with Low-Budget Stuff.
Installed a 60cm Offset Dish with an unmodified Octagon TWIN LNB connecting via a 12V Bias to a NooElec SDR Stick i can receive the 10706 EB Beacon with GQRX on RPI3 whitch is also my 1st experience in using a "LINUX-System". Not very difficult due to get a couple of Information out of the internet.
Lokking forward to get the Signals from the Amateur Radio Beacon hopefully the next few weeks.
73
herbert
dl4sdr>qth JN49 Square
zur Info:
am 21.12.18 hatte ich noch die 27Mhz Version geliefert bekommen aus diesem Shop
(via AMAZON)
like to know how difficult is it to remove the quartz crystal ?
Hi Peter
mni tnx info. Octagon Web-site will not show the documentation for this stuff.
So Thank you very Much for detailed answer which will help me receiving es'hail-2 in the near Future
73s
herbert
One more question using this Octagon twin LNB Slim Optima LNB:
Is 12 Volt applying the right one voltage switching it to LO (9.75Ghz) ?
mni tnx info
hny
herbert
Hello,
as a Beginner in "Ghz" Satellite Communication i have joined this forum to get input.
Nice to meet u all
73 es hny
herbert
dl4sdr (LIS in 1989 when sdr was not known )