Hey guys,
I reopen this thread to search some help.
I have bought the G-5500 but I have some problems to calibrate it.
I did this:
first I did the ZERO adjustment of the meter with the screw below it (with power off), than I brought the EL rotator *mechanically* into exact 180° position (I aligned the 180 markers on the rotor) and I used the Elevation Full Scale potentiometer on the backside to adjust the meter to show 180°.
Now when I return to zero I noticed that the 90° on the controller is no longer aligned like the markers on the motor... and also the 0°.
Is this normal or I'm doing something wrong?
Thanks in advance for your help.
Vito