Posts by IS0GRB

Hello Wilhelm i added the section "Last images decoded on 10489615 (HS-MODEM 4410 QPSK BW:2500Hz - QO-100 Standard)" in my WebSDR, so you can try to test image transmission with the great HS-MODEM.
I hope to contribute to improve the activity of image transmission with HS-modem
73
Roberto IS0GRB

Hi F5VMJ, if the recipient's email address is not a @winlink.org email address and you've never written an email to this address, the system will probably reject it.
May i suggest you put in the subject //w2lk(space) before the subject.
This will force the system and it should in all cases be sent by your client making it clear to the server that it is not spam.
My server has no implication in this, it is decided by winlink centralized server.
73
Roberto IS0GRB

I added the VarAC label on 10489595 in my websdr

73

Quote from SP5LOT

Is winlink server not working today ? Now we have an emcom exercise in Poland and we wanted to use it

73

SP5LOT

Hi SP5LOT yes it was working.
Did you have trouble connecting?

73

Quote from SP5LOT

Hello Roberto

I assembled such a set: Pluto and naked LNB synchronized gpsdo leobodnar, SKY65135 1 W amp. 5el yagi 2.4 Ghz, sdr console, virtual audio cable. With this transmitter I establish a connection between Winlink and Vara with a speed of 80bps on the frequency 10.489.635. And I use all the functions of winlink.

By the way, I can do FT8, FT4 and JS8CALL QSO

All the best and 73

Tom SP5LOT

Display More

Hi Tom, i'm very glad you were able to connect with a negative SNR.
VARA is very performing and your setup proves it.
Many congratulations, keep me updated on other tests
73
Roberto IS0GRB

Quote from SM0YOS

Hi Roberto,'

I have done some more ardop testing via Winlink Express in Windows and ardopc in a Raspberry pi.

Same result, i send a connect request and got an answer back but ardop can not decode it.

The signal strength is "normal" on the reply from the gw compared with the Vara traffic level.

Vara works fine with the same radio setup.

Display More

Hi Tomas, thank you for the report.

It's the same problem we had at the beginning, we had hired the American Ardop developers of winlink but they weren't available to create a version dedicated to the satellite with different timers as they couldn't carry out tests since they didn't have access to it.

For this reason, the colleague who develops VARA has created a dedicated version that works.

I also reserve the right to do some tests locally to see if the problem can be solved...

73

Roberto IS0GRB

In ardop virtual tnc set the tuning range to max (200) probably the frequency is not exactly and reduce the buffer in sdrconsole so you can see the audio delay at the bottom.
Also reduce the virtual audio delay, in the program folder you will have a tool that allows you to reduce the buffer (delay). Probably with vara you will have a higher speed.

Keep in mind that you may have connection problems because Ardop does not consider the satellite delay and without modifications as they have been done in Varasat it expects a response for a period of time, otherwise it sends the request again creating a collision.

73

I added the APRS label on 10489590 in my websdr

73

Hi Thomas i enabled Ardop together with Varasat on winlink server.

4FSK, 4PSK, 8PSK and 16QAM modes are active.

If you can do some tests let me know if everything works

73

Roberto IS0GRB

Hi Thomas at the moment i have only one rtx set up for the varasat modem.
In all cases the vara is more performing for connections
73
Roberto IS0GRB

The latest versions of OBS integrate different implementations and it is useful to update it with libx265.

To update OBS 28.0 and later use this ffmpeg package V.5.1.2.

Overwrite the .dll files contained in the bin directory of the package in the 64bit directory of OBS.

Below is the link to the ffmpeg 5.1.2 latest release package:

https://www.gyan.dev/ffmpeg/bu…eg-release-full-shared.7z

You can also find it also on my google drive:

https://drive.google.com/file/…dRI6S8BU/view?usp=sharing

OBS encoding sources natively in H265 without graphics card with libx265 guarantees much higher quality.

73
Roberto IS0GRB

Hello F4IYV, please login in the Pluto and do this command to format the jffs2 partition:

# device_format_jffs2

Reboot Pluto and try again to upload my patch and save parameters.

If not work please use the recovery procedure first using the 0.32 Adalm Pluto firmware.

If you have others problems write me again.

Best 73

Roberto is0grb

Info for H265 patch (libx265) on OBS without dedicated card:

Since version 28.0, the integrity check of files, including DLLs, has been added to OBS

Those who install OBS v.28 and later will no longer be able to patch H265 and therefore will no longer have libx265 available in the drop-down menu upon registration.

Those who intend to use H265 with libx265 will have to install the latest version 27, 27.2.4, which can be downloaded at the following address:

64bit: https://github.com/obsproject/….4-Full-Installer-x64.exe

32bit: https://github.com/obsproject/….4-Full-Installer-x86.exe

I suggest disabling the OBS update check in SETTINGS> GENERAL; remove the flag from "Automatically check for updates at startup" and confirm with OK

73

Roberto IS0GRB

Hi Rolf sorry I'm late.
You should verify that all fields of the web page form are validated.
If you have never installed the my patch for DATV it is likely that some fields have no value as they are taken from the configuration saved in the Pluto.
Essentially check the Audio settings part, set to Default and Encoding, set to Internal.
To be sure, check that the symbol rate is set correctly. if you still have problems send me an email
73
Roberto IS0GRB

Hi all, i have updated the document on how to transmit in H265 without a dedicated card that you can find at the top of the Pluto page in documents of my patch.

There are all the explanations on how to make CBR bit rate control work perfectly with both libx265 and hevc_qsv.
The update is for both Italian and English document.

https://drive.google.com/file/…OM3BZM8r/view?usp=sharing (italian)

https://drive.google.com/file/…kxqxg7j3/view?usp=sharing (english)

The quality of libx265 is really excellent and from tests carried out the encoding with a dedicated nvidia card found it difficult to match the results. The encoding performed on obs is native

73
Roberto IS0GRB

Hello Roberto, thanks for your interest.
The patch can be used with any version of Evariste firmware; i did several tests and the colleagues who followed the tests with me did not report any anomalies with specific firmware versions.
Personally i always use the 2908 for power reasons, which in my setup is necessary, otherwise i would have to modify the PA chain, but for the SR 35, 25 and 20k, the 0201 and later, as you well know, is definitely, better for the quality of the signal transmitted at 16APSK and 32APSK, on the other hand the power delivered is slightly lower and requires greater amplification.

73

Hi, i confirm that if you have already installed the Evariste firmware you can upload the patch via the Maintenance > firmware section. Select the patch.zip file you previously saved. Make sure the file is not renamed by windows

73

Hi Baris, on the server I use the KG-STV program for windows, i have not found valid alternatives to use on linux.
73
Roberto IS0GRB

Pluto DATV IS0GRB Patch v.2.1 available (Please see release note for updates)

Download:

Pluto Rev-B: https://drive.google.com/file/…CTMd73fk/view?usp=sharing

Pluto Rev-C: https://drive.google.com/file/…PGifHaEE/view?usp=sharing

73
Roberto IS0GRB