DL5RDI Ich vermute es ist das gleiche Modul, da wird keiner was neues oder anderes gemacht haben.
Ich denke der kann jetzt auch 70cm ZF.
Aber das Terminal ist irgenwie auch .... na sagen wir mal sehr spartanisch.
DL5RDI Ich vermute es ist das gleiche Modul, da wird keiner was neues oder anderes gemacht haben.
Ich denke der kann jetzt auch 70cm ZF.
Aber das Terminal ist irgenwie auch .... na sagen wir mal sehr spartanisch.
Hi Johannes,
my MKU returns 2.0 after fix.
73, Frank
Hi Claudio, i know this problem, the same here. Have replaced with SMA.
73, Frank
DL5MGD Habe mit Frau Grüner telefoniert und die meinte die Pigtails gehören nicht zum Umbau.
Hast Glück gehabt. Ich vermute das erforderliche Pigtail wird nicht billig werden.
Habe den Converter ohne 10MHz am Test gehabt und finde die Ref ist nicht unbedingt erforderlich.
Bei dem Preis für den Konverter finde ich es eine schwache Kür das Pigtail nicht mitzuliefern, zumal der Referenzeingang mit in der Mail angepriesen wurde.
Nicht jeder OM kommt mit dem Umbau zurecht.
dj0abr Hallo Kurt, ja gute Messadapter sind Voraussetzung beim Messen aber eben auch teuer.
Meine Adapter von SMA auf N sind von Huber Suhner und haben 26db RL.
Bin oft genug auf die Nase gefallen mit billigem Kram.
Schutzschaltung wird schwierig da du einen Koppler an die Stripline am Input baun musst, das Signal auswerten und durch Microcontroler oder sowas dann abschalten lassen.
Wird bei den Kommerziellen auch so gemacht. Oder wir versuchen eine fertige Leistungsmessung zu nutzen.
73 de Frank
Hi all,
latest information from Kuhne-Electronic. The Pigtail für 10MHz Ref. is not includet with the fix.
The new documentation follows and will be published on the homepage for the next few days.
Hi David, the seals are only inside. Can you post a photo from the rear site please.
73, Frank
DL5MGD Danke für den Hinweis, Karton noch mal inspiziert, da ist nich bei. Auch nicht im Gerätekarton.
Hi,
today the MKU UP 2424 is back from repair/modification the FM'ing problem to fix it.
A connection for the 10MHz reference has been announced.
Unfortunately, the return delivery is no new description or instructions.
After opening the device, I found only an unused mini coax socket and an unused socket.
It would have been nice if you had attached the device with a cable with matching mini jack on SMA.
Something like that certainly have the fewest in the crafting box.
At a price of 890 euros I would have expected a better service after many years as a customer.
Precisely because one has brought here a faulty construction on the market.
Has anyone else received their device from the repair and technical information specifically related to the retrofitted reference?
73, Frank
DL5CN Moin Andreas,
ich bau eine auf und werde die hier mal vermessen auch bis an die Grenze.
Könnt sie Dir ja dann auch mal für eigene Messungen zur Verfügung stellen.
73, Frank
DD0KP rrr Heiner. Schaun wir mal wie gut das Projekt ist, ich frag schon mal jemand der Gehäuse Fräsen kann nach nem Angebot.
DD0KP Hallo Heiner, vielleicht können wir ja die Bestellungen für die Chips bündeln.
73 de Frank
Hi Kurt, RRR 09127 is ok, like in qrz.com
Hi Kurt,
nice Work. Can you send me a PCB i will build this PA and test it here. I can measure up to 500w here in 2.4GHz.
73 de Frank
What do you guys use for output LP filter?
Lumped, stripline, pipecap?
73 de Frank
Hi Remco,
do you have any suggestion for a good SAW for 739 MHz?
Have already looked at minicircuits but found nothing suitable.
I have looked at the spectrum of the ZF after the LNB, below 739MHz is almost no signal to see.
Maybe I first test with a low pass for 750 MHz before the mixer.
Hi Alessio,
ZF of 432 MHz from the LNB with the LO of 25,xxx is the first part of the worse S/N on RX.
The IF filter of the LNB was designed for a passband around 739 MHz.
I think the better way is to convert the 739 MHz to 50 MHz.
Most KW transceivers have this frequency range.
Using the IF on 28 MHz for the uplink is problematic because of the image rejection. Maybe the construction of the converter after Remco's suggestion with two mixers helps.
But here, too, a narrowband bandpass filter is needed.
73 de Frank
Hi Dietmar,
here i use SPID and now only SPID. After heavy storms no problems on 5elm Beam 30-10 and no problems on H-structur with 4x9 M² + 4x 18 M² für 70.
At Yaesu rotor, the ball bearing is often broken
And the best of the SPID is the easy use to control with PC.
So, if the MKU LNC 10 QO-100 is delayed, what would be a suitable alternative?
Hi David,
i think the only way to solve the problem is to build your own downconverter.
All you need is the PCB from old O.S.C.A.R. 10GHz downconverter from here:
Only the RF-Part is used her and i inject the LO into the stage after F3 with
1257 MHz for 433MHz IF.
The LO is from ADF4351.
The second option is to remove the PCB from an LNB like Megasat and remove the antennas. In their place a piece of RG402 with SMA is soldered.