Posts by DD1US
-
-
Hi Achim,
yes indeed ... 500 Emails in 3 weeks in my ARISS folder LOL
But it was really fun seeing the ham radio team from 3 different clubs in Freiburg, Emmendingen and Heilbronn working together so nicely and also the students helped during the setup of the station. We managed to get the antennas and the station up and running in about 6 hours. At the previous contacts we needed up to 10 hours ...
The rewards is always to see the big smile in the faces of the students after such a successful event ...
We hope to be able to attract some of them for the scheduled ham radio class starting in November.
Kind regards
Matthias
-
Thank you Peter and Thomas for posting the information about the contact.
iIt was a interesting week as we had to shift the date/time due to the problems in the ISS which was demanding an unscheduled EVA.
Originally the contact was scheduled for today, Friday.
Fortunately we (the team was comprised of Ham radio friends from DARC P05, A16 and A05) had built up the station already on Tuesday and did all final testing including a final dry run with the students on Wednesday afternoon.
On Wendnesday evening I got the message that the contact could not happen on Friday due to the EVA.
Saturday was also blocked and thus the only chance was to pull in the schedule to Thursday. Within 15 minutes after talking with my Ham Radio team and the school teacher I could confirm that we can accomodate Thurday and thus we saved the contact ...
Many thanks to the ARISS team for helping us to get that new time slot !
The QSO worked out very well and we got 17 questions answered by Luca.
You can find an audio recording, some pics and a presentation on my website. I will add more information shortly.
Kind regards
Matthias
-
I did not have much time but had a quick check: MER decreased here from 10 to 6.4dB while the sun was behind QO-100.
Kind regards
Matthias
-
Sorry, that was a typo: I wanted to write:
I am getting max. 170W at 2320 MHz and max. 70 Watts at 2400 MHz
Mea culpa !
Kind regards
matthias
-
Hi,
I agree.
I am getting 170W out of this PA at 2320 MHz but 170W at 2400 MHz. Removing the circulator did not improve it much, only approx. 0.2dB.
Kind regards
Matthias
-
All,
as Achim DH2VA has clearly pointed out: the limit is the beacon level, not higher .... full stop !
There is no need for higher power. The signals are perfectly clear even 6dB below.
I do not think that we should adjust the LEILA level to the beacon level as many people
will just start playing around with it. LEILA should not be used to adjust the own power
level, it should be only triggered when signals are significantly too high.I agree that the LEILA level is presently adjusted very high. Maybe it should be lowered but not
close to the beacon level. Radio amateurs should be able to monitor their downlink signal andand adjust their signals in amplitude and and spectrum quality on their own.
I also think that we should politely mention to other OMs, when their signal is not clean or too strong.
If they do not listen, then let us name them also here in the forum. We cannot ignore it.
Hopefully that will help to get the situation under control.
It is up to all of us to lead with good example.
Kind regards
Matthias
-
Hallo Peter,
das ist eine sehr traurige Nachricht.
Ich hatte noch vor wenigen Wochen ein QSO mit ihm und Karl über QO-100.
RIP Hans-Peter, wir werden Dich nicht vergessen.
73
Matthias
-
-
Excellent, congratulations !
How much power do you get out of this PA at 2.4 GHz ?
Kind regards
matthias
-
-
Hallo Andreas,
was für einen Spiegel hast Du für Deine Messungen verwendet ?
Das Transponderrauschen könnte etwas deutlicher heraus kommen. Anbei ein Screenshot wie es bei mir sichtbar ist. Ic h sehe etwa 8dB.
Ich verwende derzeit einen 1.8m prime focus Spiegel mit einem f/D=0.29, POTY feed ohne Linse und ein nicht modifzierter dual Octagon (ich meine das ist der alte OTLSO wie Du ihn hast).
Gruss
Matthias
-
Hallo Peter,
vielen Dank für den Tip den LimeSDR abzustecken und wieder anzustecken.Leider hat das nichts gebracht. Ich habe auch versucht den USB Port zu wechseln,
das hilft leider auch nichts.Ich habe jetz mal einen Airspy-mini angeschlossen und damit geht es.
Allerdings stürzt das Programm nach einigen Minuten ab.
Ich kann es dann neu starten und dann geht es wieder eine Weile.
Viele Grüße
Matthias
-
Hallo Marcel,
vielen Dank für die kontinuierliche Weiterentwicklung der Software.Ich habe einen LimeSDR-USB und würde ihn gerne auch für DATV Empfang verwenden.
Leider erscheint beim Starten von DVB-S" GUI in der Auswahlliste oben mein LimeSDR nicht.
Ich vermute ich habe etwas noch nicht richtig konfiguriert, denn der Lime funktioniert mit SDR-Radio einwandfrei.
Hast Du einen Tipp, was ich machen kann damit er erkannt wird ?
Falls sonst jemand hier in der Gruppe einen Tips hat, dann sind sie natürlich auch herzlich willkommen.
Viele Grüße
Matthias
-
-
Dear all,
I also bought a low-cost Chinese directional coupler for amazing 5,35 Euros including shipping and it performs really well.
Here is an evaluation report:
Evaluation report of a low cost directional coupler for 23cm and 13cm bands
Kind regards
Matthias
-
Hallo,
in einigen Tagen wird es eine neue Version von der SDR-Console geben, bei der die Ansteuerung des Pluto (im Sendebetrieb) optimiert wurde. Es wird heute eine erste Betaversion davon geben und ich werde berichten, wenn Ergebnisse vorliegen. Vielleicht ist dann auch das oben berichtet Problem entschärft - schaun wir mal.
Viele Grüße
Matthias
-
Good catch Heiner, yes that seems to be the same type of amplfier.
Nadher, it will be certainly not easy to retune those amplifiers from 1.55 GHz to 2.4 GHz. I think you will have to change a lot and I am not sure whether the transistors are internally matched ...
Kind regards
Matthias
-
Ich weiss aber noch nicht, ob ich auf Dauer damit warm werde ... die Digitalisierung ist schon heftig ... aber mal was Neues zum Ausprobieren.,, hatte gerade noch ein QSO mit M0KNC ...
Gruss
Matthias
-
Hallo,
Sigi DG9BFC und ich hatten heute Abend ein längeres QSO in FreeDV über QO-100.
Es ist schon erstaunlich was in einen 1/2 SSB-Kanal untergebracht werden kann.
Wir haben die Software Version 1.3.1 von FreeDV genutzt und die Modi 1600, 800XA und 700D ausprobiert.
Das Audiosignal war im 1600er Modus am Besten, immer noch recht "digital" aber sehr gut verständlich.
Wir haben die Frequenz 10489.645 MHz verwendet.
Sigi stellt aber zur Diskussion ob wir die 10489.640 MHz als "Anruffrequenz" für FreeDV etablieren wollen.Nochmals vielen Dank an Sigi mich zu dem Test zu und meinem ersten QSO in FreeDV überhaupt zu motivieren.
Viele Grüße
Matthias