Posts by PA3CPS
-
-
...or just "modify" your TRX to send 12V+ via the coax when the PTT is pushed. I did it this way to avoid additional cable works.
73 de Johannes, DL5RDI
you modify a brand new icom 9700?
-
Hi Geert! Yes! I also have the IC-9700 and now I'm not sure what to do for a downconverter which I can connect directly to the DJ7GP dual feed!
I'm also waiting for the Kuhne LNC.
A question about the icom 9700 and connection to the MKU2424B. Do you use the PTT line from the icom to switch the 2424B? And which port from the Icom do you use?
-
So, if the MKU LNC 10 QO-100 is delayed, what would be a suitable alternative?
I've got the DJ7GP dual band feed and the updated MKU UP 2424B, what could I use instead of the long-awaited LNC?
Hi David,
I use exactly the same setup. Do you also use the icom 9700?
73, Geert PA3CPS
-
Hi All
This will be my final KUHNE Setup. I hope KUHNE will extend their new Down-Converter with an external GPSDO reference input as they will do know with the current Up-Converter.
73 de HB9RYZ
Wolfgang
which program did you use to make this drawing?
-
Building the same setup here. Waiting on Kuhne and Icom (9700) now . You can also use the GPSDO for your icom9700. It has a 10Mhz sma connector for 10Mhz reference.
'73 de Geert, PA3CPS