English version is running fine - I assume Erich will publish a new German version in the near future.
Posts by DL2SBA
-
-
Update
Erich found a glitch in the GERMAN version - I'll have to check the ENGLISH version this evening ...
-
Hi Forum
I have a strange issue with the IC-9700 & SatPC32 combo.
When running SatPC32 ((06/2019) to control my IC-9700 (FW 1.11), the downlink channel always uses the D-mode (USB-D, FM-D) instead the regular mode (USB, FM).
I can switch via the front-panel to USB/FM but selecting the next satellite switches back to D-mode.
I've resetted the IC-9700 to factory defaults and reconfigured the IC-9700 according the presets from DK1TB http://www.dk1tb.de/IC9700_settings_dt.htm - same behaviour.
Erich DK1TB, the autor of SatPC32, has no idea what causes this behaviour - but he's running FW 1.06 on his IC-9700 - maybe this causes the behaviour?!
Has anybody tested and/or experienced a similiar issue?
-
The classic issue - i8n and NLS
Decimal separator
Germany ","
UK "."
Field separator
Germany ";"
UK ","
Import-/Export-files should be never NLS dependent :-/
-
Hi Roger
I'm also running FW 1.11 and CS9700 in V1.10.
I have an idea - can you please post the file, you was able to load, here in the forum?!
-
I used the import function when the "Satellite/Satellie memory" section is selected in the tree - works without problems?!
Attached you find my current sat memory exported from CS9700.
-
PH2M Frank many thanks for the settings!
-
Hi Forum
has somebody already entered the various HAM satellites into his IC-9700 SAT-memory and is willing to share the list with us/me?
A CSV-export file from CS-9700 application would be great!
-
Hi Clive
this is exactly my problem ...
@forum Anyone a spare pre-build one for me?
-
-
-
Hi Forum
any suggestions for an azimut/elevation ratotor?
I assume the currently available ones are
- YAESU G5500
- SPID RAS
- Prosistel PST2051D-PRO + PST2051E COMBO
The SPID looks a little bit "hand-made" and the YAESU seems to be no longer available in the EU?!
Any suggestions?
-
Current status on my POTY
It worked ~100mW at the dish and five SSB-QSOs done today - these guys had good ears!
Now another preamp in front of the WIFI booster is necessary to get more power to the dish ...
-
I'll come back to the DB4UM design - has someone build this PA in the meantime?
-
HB9RYZ
Congrats Wolfgang - this is also my target setup - currently struggling with my available time ... and some Chinese amps ...//Dietmar
-
When I check the hf-satcom plot he measured >30dB return loss:
[Blocked Image: https://uhf-satcom.com/storage/blog/patch/RL_actual.png]
But yes, you're right I will try transmitting over QO-100 and optimize later ...
-
Thanks OMs for ultra fast reply!
The analyser is directly coupled to the feed with an SMA M-M - when I use a 1m Hyperflex the 1.8GHz dip is still there.
Fine tuning will be done by bending - I'll try it later, when I've installed it at the dish.
But when I check the origin, I also have this double-dip but far more deep >30dB compared to my week 11dB - but maybe as proposed fine-tuning will help.
Thanks again!
-
Hi Group
I've build a POTY from Hans - I'm pretty sure, that I've done it right
please no comments on my soldering skills on this type of hardware.But the return loss plot is a little bit strange.
Anyone has a hint, what I've done wrong - the plate distance is 3mm ...
-
Wolfgang - hand wound chokes or some commercial products?
-
Hi Forum
maybe I'm blind, but I didn't find any information how to perform a TX frequency calibration on my LimeSDR mini (inside SDR-Console 3.0.7).
The TX frequency is about 200Hz too low.
Any help is appreciated!