Thanks Jerry
73, Wolfgang
Thanks Jerry
73, Wolfgang
Hi All
From DJ7GP - sorry for the misstype.
https://www.bamatech.net/anten…hail-2-P4-A--antenna.html
73 de HB9RYZ
Wolfgang
Hi All
QO-100 Remote Operation with a Notebook from everywhere with the ICOM Remote-Software RS-BA v2.11 solution.
Just tested successfully today
73 de HB9RYZ
Wolfgang
Hi All
This will be my final KUHNE Setup. I hope KUHNE will extend their new Down-Converter with an external GPSDO reference input as they will do know with the current Up-Converter.
73 de HB9RYZ
Wolfgang
Hi All
This will be my PE1CMO Setup.
73 de HB9RYZ
Wolfgang
Hi All, I ordered the fully solution from PE1CMO and I'm keen to test "simplex" operation over the OSCAR-100. You can still listen on the WebSDR as backup/control.
As soon I got it, I will let know my expierence.
73 de HB9RYZ
Wolfgang
Hallo Thomas
Bis jetzt läuft er so stabil wie der Octagon LNB.
73
Wolfgang
I also tested this morning the GOOBAY Single LNB 67269, which works fine.
USB-Cable Extension over a LAN Cable
If you want to use a USB connection over more than 30m LAN cable. So can run the SDR-Receiver near by the dish and listen to the SDR in the shack. And if you have to ajust the dish you can just plug-in your notebook to the SDR next to dish.
I can recommend the following product:
https://www.digitec.ch/de/s1/p…tender-switch-box-7305581
73 de HB9RYZ
Wolfgang
Hi All
I agree on the statement of DL3DCW that a software solution is an easier way and cheaper too. Simon Brown "SDR Radio Console v3" will update his software soon with this Software feature
But my final solution should be one dish for the up- and down-Link and one transceiver with fullduplex SAT mode (Up on 2m and Down on 70cm).
I just tested this morning the Up-Link of my new BaMaTech Dualfeed from dj7gp which works perfect as my current 13cm Helix Antenna with 5 turns. So I'm waiting to get the new Downlink Converter from KUHNE.
More infos under http://www.hb9ryz.ch/sat
73 de HB9RYZ
Wolfgang
Hallo Community
Bin neu und erst seit dem 6. März QRV auf dem OSCAR-100.
Möchte nun meinen LNB OCTAGON OTLSO (siehe Bild)
so umbauen, dass ich mit der externen GPSDO Referenz (Leo Bodnar, 2-Port Version) den LNB stabilisieren kann.
Wie viele verschiedene Umbau-Versionen gibt es dazu?
Eine genau Anleitung für Hochfrequenz-Anfänger wäre toll inkl. Print Screen der GPSDO Software in Bezug auf die eingestellte Frequenz.
73 de HB9RYZ
Wolfgang