I was able to see good DATV Beacon QO100 I'm happy after so long signal down 73 IK1HGI Tony
Posts by ik1hgi Tony
-
-
hello to the group finally after two months I managed to see DATV here we go OM (G0AZQ Tony) good signale down 73 IK1HGI Tony
-
Ciao, sto provando a RX il faro qui, vedo a volte la costellazione di IQ lampeggia a volte ma non sembra stabile non sono sicuro se sto impostando tutto correttamente? Potrebbe essere il segnale arrivare qui troppo debole?
[Attach = '1811', 'none', 'true'] [/ attach]
Grazie, 73
Ed PY2RN -.-
Hi here is what happens on my constellation are small inpulssi but no coding is very strange
-
Dear Tony, I see it hard. In my opinion it depends on your processor, from the photo I see that it is an i3. I with your same settings (more or less) I can barely see with an i5 the constellation and the video with audio on VLC. By
Hi Giuseppe thank you, yes I see the constellation happens but they are of slesciii not stable, even this morning I am not here the constellation I don't see, I don't see the tone of the binca line in descent but only the centering point, I see on the Amsat's warning the OM and I do the research and OK but I see nothing patience
73 ik1hgi Tony
-
hello well now I have the new CPU with the coreldro 3 AVX system .. the dish I receive the signals of the OM but the constellation does not happen what can be non coding
73 Tony ik1hgi
-
-
ik1hgi Tony do you see the NB beacons at 739.550 MHz and .800 on the waterfall display? They should (even with wrong polarity) show up as thin lines. How did you align mechanically the antenna?
hello I'm trying your suggestion 739.500 / 800 I have the signal of the telemetry beacon and of the cw
73 ik1hgi Tony
-
ik1hgi Tony do you see the NB beacons at 739.550 MHz and .800 on the waterfall display? They should (even with wrong polarity) show up as thin lines. How did you align mechanically the antenna?
thank you I understand I know where and the beacon but they are proofs that I do maybe and my LNb and a little moved of the frequency of 9750, the beacon 743,50, I try on different frequencies if the constellation is opened
sorry I did not write the position of my LNB and in horizontal with 18+ times tension
73 ik1hgi Tony
-
Hi Erich as you see my images I tried again in all the ways for this blessed constellation does not arrive to see the beacon, at this point I will stop if we receive some gift of the daughters, Erich the CPU lacks AVX and I don't codify I think. hello and
thank you 73 ik1hgi Tony
-
74Hello Tony. Beacon is by LOF 9750 on 742,500 +/- not 747. / 748.
73 Erich DL8MCO
yes Erich his following all the advice of Nico the Beacon with a LNB LO 9750 on 742,500 +/- 745.500 I can't find the signal I got out of the rang
ik1hgi Tony
-
hello SWL - markro92 at this point a month of tests and try again, with the program with version 2.0.10 dvb-s_gui my pc nothing, after hours, hours, weeks, even this morning 3 hours to find the beacon nothing to abandon! ! let's see if I find a motherboard scheme for my PC, thanks for everything
73 IK1HGI Tony
-
Version 2.0.8
Download: http://v.1337team.tk/dvb-s_gui_amsat.zip
Changelog:
- Fixed bad multithreading bug where the Demod Worker thread loses lock after changing the FFT Size slider.
- Fixed UDP packets not starting with sync byte 0x47 to increase compatibility with other software (thanks to evariste (f5oeo) for reporting)
- The same as above also applies to MPEGTS file recordings.
- The RF Filter slider is now only enabled for devices that support it.
sono su skipe I activated skipe pronto 73 Tony ik1hgi
-
Markro92 Hi this is my computer .. you said you did a new version 2.0.7 for the problems of Tony ik1hg in the message N #120 i, has this point will not present more info I do not know where the problem
I have a PC for 2 years but to see a DATV Beacon I don't go and get another PC now if I find some opportunities ok but new I don't think so I have 3 PCs 64 and a 32 thanks 73 Tony ik1hgi
-
-
ciao lucio ok ho provato ma non va ho fatto tutti i modi!!!! magati il giorno di pasqua trovo la sopresa che vedo grazie 73 Tony ik1hgi
hello lucio ok i tried but not go I did all the ways !!!! magati the day of Easter I find the surprise that I see the DATV beacon thanks 73 Tony ik1hgi
-
Markro92 Ciao, ci sono ancora problemi con il buffer di codifica OK no signal del beacon DATV
73 Antonio
-
SWL - markro92 Hi downloaded the new version this morning but immediately encountered VCRUNTIME.DLL problems in my system and system
-
@ON7NDR : Hi Nico I hope to pass my test with the new version of exceeds by encoding my PC CPU
73 Tony ik1hgi
-
Test of my CPU with CPU-Z of the Intel Peintum @ G2030 @ 2999,3 Mhz features ok fb you result this and the Valuder link
this point if you have the possibility Markro92 to give you the system of the PC type program from the year 2017 other pc you can not buy
73 Tony ik1hgi
-
Hello after so many hours at 00:20 to receive a QO-100 signal, I finally hear the Beacon !!! thanks Markro92 great program tomorrow we continue for satellite beacon
73 ik1hgi Tony