[user = '1059'] PA3FBX [/ utente]: Quote "Mai trovato 2.0.10 ancora"
Ciao Benno, dispone di versione 2.0.10 disponibile ora
ho te invia un e-mail
riguarda
Jan
the dvbs versione 2.010
[user = '1059'] PA3FBX [/ utente]: Quote "Mai trovato 2.0.10 ancora"
Ciao Benno, dispone di versione 2.0.10 disponibile ora
ho te invia un e-mail
riguarda
Jan
the dvbs versione 2.010
G0WZL this afternoon installed windows 10 worked immediately with dvb s-2 version 2.0.10 parabola 1 meter LNB NF 0.05 .. !!!! no modified original and is very good
73 ik1hgi Tony
Tony I see you got RTLSDR scanner to work, I tried for a long time to get it to work under windows 10 but failed.
Hi @GOWZL Thanks for your advice to understand under windows 10 if it works using RTL-SDR, I have to find the time available all days are with the grandson 1 half years I see for Sunday install windows 10 I'll give info
73 thanks ik1hgi Tony
Display MoreHi all, New to the forum but an old ham here...
@ Markro92 Kann du ein alteren version auch online bringen.
Ich wurde gerne 2.10 oder 2.11 au mal versuchen weil 2.12 functioniert aber sehr instabiel.
Lauft hier on RTL stick und win 10 mit 1 meter spiegel..
Vielen dank fur die vielllllle arbeit, aber es freud uns vieeeeeellllll...
73es Benno
Used a new key on RTL SDR.COM with version 2.0.12 problems, playing with version 2.0.10 and very stable and well received, I receive the signal with a 1 meter antenna. receiving version 2.0.12 and difficult coding for the RX system, today the parabola is set, the maximum signal seems to be fine
ciao @ Markro92 hello @ Markro92 a week of sadness I can no longer encode the encoding signal, all are in the SHORT system and I don't understand the difference between SHORT and NORMAL modes, the DVBS_GUI program version 2.10 and version 2.12 a lot of coding problems !! ! I'm about to abandon it !!! you cannot stay hours hours without receiving if normally normal ok; ?
73 IK1HGI Tony
Display More
could it be possible to add two vertical lines with the selected BW in the waterfall?
This could help to guess the right BW and centering of a DATV Signal.
Similar to "Show FFT after filtering" but without blanking the upper and lower frequencies.
Have a look at my attached picture to clarify what i mean.
DB8TF HI QUESTION HOW NEVER USE THE FREQUENCY 1106.009 OTHER WAY TO USE LNB THANK YOU
73 IK1HGI Tony
I am 3 nights I can not encode this blessed Sym Rate 2000 no coding !!!!! I had to activate Minitiouner to understand who, maybe until the end IW4APQ my friend Franco, difficult with the DVBS program Gui v 2.12 SWL - markro92 you can get on the new version, the ways to find a fast coding performance to the DVBS GUI program
73 Tony ik1hgi
Hi To the whole group, from yesterday I can't receive and I don't understand the Show signal and it's difficult to quickly encode, no video there is another system to understand how to do it thanks
73 IK1HGI Tony
Hello to the whole group, since yesterday I can't receive and I don't understand the Show signal and it's difficult to quickly encode, no video, there's another system to understand how to do it thanks ..
I am 3 nights I can not encode this blessed Sym Rate 2000 no coding !!!!! I had to activate Minitiouner to understand who, maybe until the end IW4APQ my friend Franco, difficult with the DVBS program Gui v 2.12 SWL - markro92 you can get on the new version, the ways to find a fast coding performance to the DVBS GUI program
73 Tony ik1hgi
Display MoreHi All
But I was not able to see any DATV Video with this software and the VLC-Player
Is there a complete Quick-Quide how to do so?
Why are developers in the HAM-Community never never write manuals how to use there own software - this is the missing USP.
And let the users share how it works. Just a Quick-Quide in a PDF for dummies would be engough. But every time I have to collect all information our and our in the Internet - its just a waste of time for everybody.
73 de HB9RYZ
Wolfgang
here a guide of the program dvb gui I hope that for you and useful for some details as presented on7kec Grussen images are all ok, only in this system it takes a lot of pasinzae to understand SR ok sivedere when sitrasters, the FEC and in automatino only of set up manula when you see the signal all here (( VLC comando media udp://:@8888 ))))
Greetings Tony IK1HGI
Are the right .GRF files in the minitioune directory? ursc.ax installed? Did you try graphstudionext?
Mike
@Mike yes download version 8 I found the missing wires decode Mpeg2.GRF, Newdecod Mpeg2.grf, Newdecod H264.grf, decod H264.GRF, Usrc.ax, and I solved the problem thanks for your help
73 ik1hgi Tony
ik1hgi Tony You should install the version 0.8s first. then when all test are passed as Robert described and you can see the beacon.
Then you can install version 0.9 and use this one..
@DD0KP Thanks after two hours of understanding I read your info and it was useful I don't know how to thank you I was happy I didn't recur this maneuver after hours hours my I remembered 6 months ago I did this what you ask
73 ik1hgi Tony
Help I can't solve the graphic signal of the video I installed all the graphics card drivers Gerfor 8800GT I still see the RED sticker !!!! a week and I don't know where to hit my head how can I solve the problem?
thanks 73 ik1hgi Tony
DVBS2gui funziona anche su Linux?
73 F4FDW
Once again I tested the pluto with linus thanks to the help of Nico for his care to be able to understand the program leandvb install video ubuntu 18.04 for qo-100 datv in real time video / audio with mplayer this is a guide how to use and install "leandvb" software for experimenting with regular rtlsdr for receiving oscar 100 datv on a normal 9750 lo pll universal lnb and the datv beacon as an example in my video ..... good luck Nico on7ndr ..... de on7ndr Nico
https://www.youtube.com/watch?v=NwOeXf-ptqg&feature=youtu.be
73 Tony IK1HGI
SWL - markro92 due giorni che faccio un test su Windows 10 non riceve grandi problemi !!!! i segnali non costellano nessun video condizionale e non vorrei tornare su win 7 e solo questo da sperimentare in futuro se si rende conto e mette anche la codifica dei segnali di Windows 10 ..... il sistema win 7 ha win10 inizia a gennaio 2020 e non risolvono informazioni su win7
73 Tony ik1hgi
ciao funziona bella delusione del VLC 3.08 a 64 bit npn funziona per me .... non vedendo il video subbito parla con gli amici che mi chiedono di usare la vecchia versione 2.21 a 32 bit ora ok funziona molto bene
73 Tony ik1hgi
Hello,
2.0.12 version crash after 3mn, here W10 Pro RAM 8Go, CPU AMD 3.4 GHz.
Idea ?
Hello Chris,
tried to use on an AMD the DVB S2 program does not work well, and has been studied of the CPU Model processor: Intel (R) Core (TM) i3-3220 CPU @ 3.30GHz you cannot have good quality results
73 ik1hgi Tony
DVB-S2 Demod GUI Version 2.0.12
CPU Model: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz
libairspy version: 1.0.9
libairspy num_devices: 0
Initializing 8192 work-queue buffers...
ResampelWorker: address is: 0x630e00, first member is at 0x630f00
creating debug file...
MainWindow::MainWindow()
Querying CPUID...
Loading generic settings...
Available UI styles: ("Windows", "Fusion")
Applying UI Style 'Fusion' ...
Setting up GUI...
QMetaObject::connectSlotsByName: No matching signal for on_debug_spinbox_valueChanged(double)
Switching mode to DVB-S2
ResampleWorker::setSpectrumInverted(1)
DemodWorker::setDVBMode(1)
Enumerating Devices...
Starting Worker Threads...
Worker thread started: 9FFTWorkerWorker thread started: Worker thread started: 9FIRWorkerWorker thread started: 10LDPCWorker, thread: 7, thread addr: 0x7dcf40)
Worker thread started: 14ResampleWorker, thread: 4, thread addr: 0x630ec0)
, thread: 3, thread addr: 0x62f900)
11DemodWorker, thread: 5, thread addr: 0x631040)
Worker thread started: 13ViterbiWorker, thread: 6, thread addr: 0x7db940)
, thread: 2, thread addr: 0x62f808)
Init Complete!
@Alesandro ik4idy as I said I have Mintioune and like but do not like having the dish ready ... everyone takes his choice, I repeat does not like to have the dish ready, the work of SWL - markro92 spending zero € uro, did something special, I like the system is working on it, Alex you have Linux test also great performance dvb2 automatic video, my decision on the experiments that others do until today I had no problem to receive with DVB S2, give opinions and always a pleasure to help those who make and give small information, then why say that the program is not good !!! I don't like the ready dish and voila Mintioune I receive !!!!!
73 Tony ik1hgi my excuse I don't know how to write English
hello I abandoned MiniTioune V2, with passion I'm checking the new dvb-s2 new program 2.0.12, with great pleasure now I receive the constellation, compared to the previous 2.0.11 a lot of effort, the passion pushes me in this program !! and I ask SWL - markro92 if possible in the future I can find a system to automatically activate the video, in the Linus system thanks to Nico de Roo gave me the opportunity to see, also the MiniTioune system has the video activation automatically, the only thing pleases in this is to see nice DVB-S2, now everyone is making an effort now that you don't see the vertical line, I wouldn't want some people to leave ...
73 Tony IK1HGI
use in Ubuntu 18.04 for Leandvb test not yet perfected plan we arrive excellent texts thanks a great friend Nico of the councils
73 Tony IK1HGI