Wieso nicht im Hintergrund eine Endlosschleife in Morsecode u/o RTTY seines Rufzeichens laufen lassen ? Nur so eine Idee.
Posts by HB9SKA
-
-
HF o-/Bias-T/-o HF
|DC
/ \
12/18Vo o--/7805/--o 5V
-
Wenn Du mit dem Gerät nahe genug am LNB bist, sollte das funktionieren. Ich sendete mit 20 W in eine Yagi, diese befindet sich unweit neben meinem Shack in einer Scheune.
Du meinst die Handfunkgeräte haben eine 24. Oberwelle von Hause eingebaut?
Sozusagen Ja
-
Update
Inhaltsverzeichnis
Weitere Stationsbeispiele von Eduardo, PY2RN
Table of Contents
More station examples of Eduardo, PY2RN
Sender & Empfänger
Transceiver (digital/SDR)
Adalm-Pluto:
Modifikationen für den QO-100-Betrieb werden ausführlich von Eduardo, PY2RN, beschrieben.
Transceiver & Receiver
Transceiver (digital/SDR)
Adalm-Pluto:
Modifications for QO-100 operation are being developed by Eduardo, PY2RN.
-
Hallo Ulrich
Man braucht keine Diode, man kann auch direkt in die Antenne senden und hört so die 24. Oberwelle. Bei mir hatte es jedenfalls so geklappt.
-
Hallo Robert
Habe meine Einstellungen angepasst, jetzt bin ich da auch erreichbar.
-
OSCAR - Status KW 08 im PDF-Format
Rückkopplung / Feedback
Infos und Empfangsberichte sind immer gerne willkommen, auch in
diesem Forum als Antwort.
Information and reception reports are always welcome, also in this
forum as Answer.
Tnx 4 report
Tnx 4 likes
73 von Thomas - hb9ska@uska.ch -
There are interesting articles in the March Issue 93.
-
-
Das erste deutschsprachige, unabhängige Bulletin über AMSAT und HAM-Space
Neu in Ausgabe Februar 2021: -
Die Dämpfung des ATTenuator im TS-711E ist 20db. Da konnte ich am S-Meter bei Empfangstests/QSO's feststellen, dass 20dB Dämpfung zu viel sind, die Signale wurden deutlich leiser und QRP-Stationen unverständlicher. Mit dem 10dB-Dämpfungsglied, wie oben abgebildet, zwischen RX und Konverter (1. Version von AMSAT-DL) bin ich bestens bedient. Natürlich spielen auch der LNB und die Länge des Sat-Kabels eine Rolle. Bei mir sind es 20 Meter.
Darko gab einen guten Denkanstoss, aber bei jeder Anlage verhält es sich anders.
-
Man braucht nur die Übersteuerung des Frontends zu dämpfen. 30 - 40 dB wären für meinen TS-711E zu viel, bei mir reichen 10dB. Damit empfange ich mit S7 (QRP) bis S9 (PSK-Bake) ohne lästigem Rauschen im Kopfhörer.
-
OSCAR - Status KW 07 im PDF-Format
Rückkopplung / Feedback
Infos und Empfangsberichte sind immer gerne willkommen, auch in
diesem Forum als Antwort.
Information and reception reports are always welcome, also in this
forum as Answer.
Tnx 4 report
Tnx 4 likes
73 von Thomas - hb9ska@uska.ch -
There was also a challenge last year initiated from AMSAT-UK. Vladimir, R9LR, called me a few times, he was also the winner.
-
Doch - sie lässt sich speichern. Wenn ich aber dann die Frequenz wechsle, passt der zuvor gespeicherte Offset-Wert nicht mehr.
Und was macht zwischenzeitlich die RX-Frequenz ? Der LNB sollte dann auch "hochstabil" sein.
-
OSCAR - Status KW 06 im PDF-Format
Rückkopplung / Feedback
Infos und Empfangsberichte sind immer gerne willkommen, auch in diesem Forum
als Antwort.
Information and reception reports are always welcome, also in this forum as
Answer.
Tnx 4 report DK1OM DE3JGA
Tnx 4 likes
73 von Thomas - hb9ska@uska.ch -
Das mit den schwachen Signalen über den Transponder ist seit etwa zwei Wochen bekannt, es wurde darüber auch im ANS der AMSAT-NA berichtet.
RadFxSat-2/Fox-1E Is Designated AMSAT-OSCAR 109 (AO-109)
On January 17, 2021, the RadFxSat-2 cubesat was launched on a LauncherOne vehicle off the coast of California. RadFxSat-2 is a joint mission of AMSAT and the Institute for Space and Defense Electronics at Vanderbilt University. The satellite carries a telemetry beacon and a linear transponder, along with radiation effects experiments. The telemetry beacon has not yet been heard, but the transponder is partially operational at reduced signal strength. Work continues to recover the telemetry beacon and characterize the transponder with the goal of opening it for general use. AMSAT hereby designates RadFxSat-2 as AMSAT-OSCAR 109 (AO-109).
Testing and characterization of RadFxSat-2/AO-109 continues. After user reports and additional verification that the linear transponder is at least partially functioning with a low level downlink signal, the Engineering and Operations teams made the official designation. Of the several objects have been suspected (D, C, and M), with Object C being suggested recently by Drew Glasbrenner, KO4MA. Recently, these satellites have sufficiently spread apart to allow testing to determine which object is RadFxSat-2/Fox-1E.
During the 2 Feb 2021 0240 UTC passes, command station Mark Hammond, N8MH, compared Objects D, C, and M for the "best fit" for received signals with Doppler correction on both the uplink and downlink frequencies for each of the candidate objects. Objects D and M were quickly eliminated from further consideration, due to poor frequency predictions of Doppler correction compared to observed signals. The clear best fit is Object C, which is known OBJECT C, INTELDES 2021-002C, and NORAD CAT ID 47311. Therefore, AMSAT is happy to identify Object C/2021-002C/47311U as RadFxSat-2/Fox-1E and make the designation AO-109. Thanks to Alan Biddle, WA4SCA, for support during the identification.
The Engineering and Operations teams appreciate the community's cooperation thus far and affirm the request that users do not attempt to use the transponder until further notice. The proper identification will allow further characterization of the satellite's condition through additional testing.
(ANS thanks Mark L. Hammond, N8MH, AMSAT Director and the Engineering and Operations Team for the above information)
AMSAT OSCAR-109 Update
The RadFxSat-2/Fox-1E CubeSat has been designated as AMSAT-OSCAR 109 (AO-109). AMSAT engineering and operations teams appreciate the satellite community's cooperation to date and reiterated their request that users not attempt to use the transponder until further notice. "The proper identification will allow further characterization of the satellite's condition through additional testing," AMSAT concluded.
RadFXSat-2/Fox-1E was launched on January 17 on Virgin Orbit's LauncherOne, which carried 10 other satellites into space. AO-109 carries an inverting linear transponder, with uplink at 145.860 MHz ? 145.890 MHz, and downlink at 435.760 MHz ? 435.790 MHz. Telemetry will downlink on 435.750 MHz.
[ANS thanks AMSAT Director and Fox Command Team member Mark Hammond, N8MH, for the above information]Ob diese Mission damit erfolgreich ist, möchte ich bezweifeln.
-
Lässt sich denn die Offset-Einstellung in der Software nicht speichern ?
-
-
Hallo Rudi
Mit einem 2m/70cm-Diplexer sollte es auch gehen, dann bist Du aber nicht vollduplex. Ausser Du verwendest den SDR-Stick als Hauptempfänger und den IC-7000 als Überwachungs-RX. Da ist aber das Display ein wenig klein, vielleicht lässt sich ja ein externes anschliessen? Als "Überwachungs-RX" verwende ich den PC-Browser und den Goonhilly WebSDR.
73 und viel Erfolg