Posts by pa1kek

Hello dear colleagues OM,

After several attempts to register on VIVA Datv, having NEVER received the confirmation email, I decided to give up ! There are some of you who would like to tell me where to download the Minitiouner program ?

Thanks so much.

Gio - PA1KEK

Hello everybody,

i'm trining to use minitiouner express with Minitiouner software and I'm facing with a problem to decode the images, maybe i made a mistake with settings; i need help in this issue; attached a picture of situation, I'm wondering why the C/N MER value remain so low...

Thaks a lot to everyone.

Hi Dirk,

thank you very much for the suggestion, that was actually the problem!

Thanks again.

Thanks,

I'll try...

Dear OM friends experienced in Pluto sdr,

my Pluto seems not to give any signal in transmission;

My configuration includes Plutosdr + CN0417 + EP ab-003. Recently everything has been working fine but now I have no more signal output.

Is there any way to investigate if anything comes out by pluto?

Thanks for your help and suggestions

Gio -PA1KEK

TNX,

i get something...

Hi There,

does anyone can explain me how is the CN / MER parameter on Minitiouner affected?

How can i increase it?

TNX

Giovanni pa1kek

Thanks Heiner,

I tried to improve the tuning, now C/N MER is almost 6 but the video is not there !!

Hello everyone,

new installation Minitiouner-Express i get this : Can anyone tell me where is the mistake ??

TNX.

Quote from DJ0MY

I am just in preparation of firing up and modifying my Nokia UMTS PA (the one with 2x BLF8G22LS-150) that I've got last year from the source in Poland mentioned here.

In order to get a decent PWR cable connection I just made small PCB adaptors for the 2x5 pin heders (2mm types)...

Since the price was identical for 4 pieces or 20 pieces I ordered 20 pieces - so I have many spare ones now

If someone is interested in a pair of these PCBs for their amp let me know by direct message.

73, Oscar

Display More

Hi Oscar,

can you let me know where i can find these items, i ned two for my PA Nokia UMTS...

TNX. Gio - PA1KEK

Quote from DJ0MY

I am just in preparation of firing up and modifying my Nokia UMTS PA (the one with 2x BLF8G22LS-150) that I've got last year from the source in Poland mentioned here.

In order to get a decent PWR cable connection I just made small PCB adaptors for the 2x5 pin heders (2mm types)...

Since the price was identical for 4 pieces or 20 pieces I ordered 20 pieces - so I have many spare ones now

If someone is interested in a pair of these PCBs for their amp let me know by direct message.

73, Oscar

Display More

Hello everybody,

I'm having problems to make a correct alignment with my 80cm dish; i followed the info from Satlex indicating elevation angle to 27 degr. but i can not receving nothing with that elevation; i can receive something at 43 deg.!

I'm based in the NL ( Leiden); can anyone, maybe from NL, give me why this happens, and any suggestions to solve this issue.

Thanks