Posts by PA3AOD
-
-
-
@ DB8TF thanks in advance .
-
DB8TF Thanks for the sw update, i can now read the data into my Raspberry-Pi. One question remains, how can i fix the ATT settings. I have a 30dB coupler but after every reboot of the Nano the ATT setting jumps back 60dB and my 30dB setting is lost.
73,
Bert
-
Will the software from your 2.4GHz Power Meter be extended (or is it already somehow available) so that the values in dB and/or Watt will also be available at the serial port.
(Any way your 2.4GHz power meter is working fine.)
73
Bert
-
IZ4RYB So your setup is now like this:
Pluto on 2.4Ghz -> Broadband amp (SPF5187 ? ) -> SKY66292-11 ->Sg Lab 20w -> 500w Ampleon PA.
73,
Bert
-
-
Hallo Kurt,
Können beide Wb und Nb nicht auf einen (Odroid) rechner laufen?
Oder ist das zu viel für einen rechner.
73
Bert
-
should be like this...http://www.hb9ryz.ch then it works..
-
-
How can i change the power output of my Pluto with the F5OEO update/change software in DVB mode?
With the DATV-Express software there was a sliderbar for tx power.
73,
Bert
-
-
Hello Martin
I use a Serial Ethernet Module for my application to avoid long and thick cables between shack and rotor
See for example at https://www.eztcp.com/en/products/
Bert
-
The first pictures received with KG-STV today, so the receive part works.
The bandpass must exactly between the two dotted lines that's a little bit tricky for automatic receiving without my interference.
73,
Bert
-
DD0KP Many thanks Heiner.
-
i got one of them
Now waiting when it will be delivered and then trying to tune them to 2400MHz for DATV
73,
Bert
-
Yes Vale seen a couple of youtube films about KG-STV.
Will leave my RX on 10.489.625 for a couple of days and see if something happens at my screen.
Made hundreds of SSTV QSO's but only in analog so now switching to digital and satellite, exciting
Thanks,
Bert PA3AOD
-
i see only a big peak at 625
-
What mode ( MSK - 4L-FSK and Code
Totally new at digital SSTV
-