Posts by on7kec

come è risolto ... per favore soluzione

come è risolte??? per favore soluzione...

How did you make it works????

Good afternoon to all...

Hmmmm extender have noting to do with changing the ip adress....(its not a usb to ethernet if) principal its a looooong usb cabel!!

So in my opinion you must not change the pluto ip settings...

But...pls dont forget to use the 5v maybay..i dont have testing thath...your usb signal (current) is to low @ the pluto site

"OS independent for fast, hassle-free setup • Kit includes a local unit (transmitter) and a remote unit (receiver), as well as a universal power adapter (power adapter must be connected to the remote unit) "

Depend on the distance of cabel....

See for info

Greetings and hope its helps you a little

Hey,

did you instal the drivers of your usb/lan hardware to your pc??normaly there is a install cd with your hw.

Do your pc see your usb/lan hardware??

Windows or linux....

Some more test this morning...with version 2.0.16

I have only sync with lower Bandwidth!!

5000000 and 2500000

6000000 and higher no sync even not on the beacon

With my SdrPlay @ 8000000 i have sync and can see all the stations on air...

Greetings to all

good mornig..

The test with the new version are very good finaly the pluto receive the wb signals

great job again Marko

Greets

Luc

Abend Marko...

Gibt nach download

Version 2.0.15!!!!

und bbgain geht nich..false version uploaded???

Gts Luc

Hey Tony

Pluto dont work here.....like you say...bb Gain dont works so the signal is the low....

greets

Luc

morning ...

Still no reaction with pluto...still no rx

Hi Markro

after very good results with sdr stick and sdrPlay i have a Pluto now...

no results after 2 days testing to receive datv grrrrrrrr (FMBroadcast,airband,2mtrs all ok)

Freq from 70Mhz on ok, second cpu ok....tested on 2 pc's same negativ results

So...HEEEEEEEEEELp

@8tf..

mein "rtl" lauf genau so wie mein sdr play kein underschied im empfang..

was ich mit mein sdrplay empfang geht genau so gut mit mein rtl stick

grussen Luc

on7kec hihi

no problems i know but i want you quick inform and dont pay attension to the setting hihihi

so quick response there was on the 125k signals

greets to you

Tks works very quick after installing the last api for sdrplay..even 125k works very good...alsoo 8PSK 125

great job again

log4om v2 oder loghx beiden freeware...

oder einfach mahl hier kucken

"qual der wahl "....

http://on7kec.be/?page_id=5751

grussen

Luc

Morgend..

"Transmit DSP" kann ich mir zwar anzeigen lassen, jedoch hat das Panel bei mir keine Funktion...stimt...sie arbeiten ja nicht mit ein sdr trx wie ein pluto usw ...wenn ich mich nicht irre muss es ein sdr trx sein um mitt sdr console tx zu machen Hans

sie arbeiten mit dein FT-817 und diese hangt am omnirig...und sdr console steuert dein sdr rx(/tx).

Grussen ON7KEC

Danke Heiner

DM1HD Hallo,

Wie kontaktiere ich Jörg (interesse am pluto mit umbau)

Danke

Luc

If i look to the position of your slider then you are around the Rx frequency of 1.300Ghz???

The position for the wb beacon is around the 8.5 mark and the freq of 742.Mhz for a "normal" lnb (lo=9.750Ghz)

Wath is the lo of your lnb?

pls take a complete picture of your screen so i can see the other settings....

Hey,

firts hny2020 to all

did you feed your lnb via a t-bias!!! (12v for nb and 18v for wb)

2) is the frequency the wright one (unmodifyed lnb= +/-740Mhz)...seems you dont have a signal from your lnb

i have use several sticks and al of them works fine...

greetings

luc

Hey Toni,

I did rx a 8psk this week...i ame very sure...It was the first time i rx the "8" dots hihi

Greetings

google is your friend hihi

http://www.rfcafe.com/business…smith-chart-for-excel.htm