kein problemen hier download lauf...
Posts by on7kec
-
-
I need to use a bias-tee?...YES
.If you dont want to rip your equipment...
yes....A t-connecter directly to the powersuplly and your spectrum analyzer!!!!
-
Hey,
only uplink is circulair not the down link.
Wb=Horizontal
NB= Vertical.....
"My goal is to try to get the signal from a satellite"....with the helix you DONT receive the satellite dr friend...
so you dont have to modify the lnb if you want rx with a sdr stick ore somthing like that...i dont know your rx so pls tell use....howe will you receive the satellite,
greetings
Luc ON7KEC
-
Hi,
have the same problem some times a go...
Did you install the program as "administrator"??
I have deinstall the program completely with a deinstall program.
than i reinstal the program as "adminitrator" and the problem was gone...
to be sure...dowload the programm again also....
greetings
-
Danke Marko dein software ist klasse alles einwandfrei nur die 000 in freq bereich aber...kein probleem fur mich
habe selbst nog etwas ram in gehirn hihi
-
sdr-play boys to remember... if you have problems...
yes you will
Install :
API/HW Driver – v3.04 (9th Jul 2019)
Instal it in the same map were you placed the DVB-S Demodulater...
open the map and you will find a "SDRPLAY" map
Open it...
Open the map API...There you will find x64 and x86....(64 and 32 Bit pc!!!)
open the map and find "sdr_play.api and lib"
Copy both to the dirctory of the DVB-S DEmod
Greeting and succes
-
fb i have tested quick and its works mutch beter than te last version on my sdr-play
very fast sync now from 2M till 250 no probs.
-
No problems to decode with a rtl stick here!!!
Down to 250Sr no probs
1Mtr dish Snr 8.6Db
Version 2.0.10 works here mutch bether than 2.0.12
-
Hey Tony,
I have also problems with the 2.12 Version....the older version 2.11 works mutch beter here...
perhabs a option for you also?
Grts
-
Hi,
Can't download!!!!
-
Hallo Wolfgang,
Ubung macht der meister
a Quick guide to help you out...
ich hoffe das es fur dich hilft Wolfgang foto2 sind meine einstellungen fur 2Mb rx...
achtung!!! sind nicht immer die gleiche
etwas fingerspitzengefuhl muss man haben beim einstellung Wolfgang
73 Grussen
-
Hi Wolfgang...
I have done the solution @ #349
Have the same problems before .....
73 Luc
-
Habe das gleiches probleem bei mir...auch kein bild
constellation and lock aber weiter nichts...
Same problem over here..constellation and lock but noting to see udp @8882 with vlc(yes last version hihi) no decoding!!
oh yes...w10 no linux
-
VU2BCN Hi,
See my solution here from 7 Aug...
Item 349
Good luck tu 73
Luc
-
Danke Oscar,
Jetzt klappt es bei mir auch hihi
73 Luc
-
PA3FYM....
Kan dat bord onder de 35Mhz??? (weer een hack toepassen??)
Voor output op 70Cmtr moet het lo sig toch 25.78...Mhz...zoals de xtalfilter...
grts 73
-
Hi,Question....
Depend the rx of low sr on the SW(image) or HW (Tunertype) in the box?
Witch image do you use in the box? (the are all "normal" enigma2 boxes )
The base of 99% of these boxes is OpenPli
Yes i have a lnb with LO 9150Mhz..hihi
I using on my satrx now HDFreaks img.
Greeting
ON7KEC
-
hi,
nothing found to make the spectrum window bigger...
why not using this?? works with Airspy
Greetings tu
-
Danke fur dein info Heiner
-
Hi,
question....
withs HW works together with Minitioune software?
greetings to all