Nice.How I can calculate for my location?
I give up with DVBGui I bought Minitioun v2 Sherit tuner (SW0.9b8) on the net because someone went to pro and don't need anymore.
Many reported that is more sensitive RX than DVB Gui so I'm trying to receive.
I can decode beacon or SR1M the same level but SR333k over 10dB on WebSDR only few times decoded...so I'm thinking what's the different between low SR and high SR?
I decoded many videos on WB and I decoded many videos SR2M 1M 500k but didn't decode many 333k signals or lower SR...My conclusion my original LNB is not stable enough or I depends on something else where I need to put attention for LOw SR?
it works the problem was to press many times Enable... the other thing which I don't know for shortcut how to change the frequency for 1kHz step?
Maybe any line to see where need to be the signal ;)?
I have no idea how to get 4 dots...Im trying to get signal in the middle and then changing Kp and Ki but not even close....
I'm looking for any manuals to help me
I have tried with lime sdr mini but the same problem I think.
Question how to set VLC media player to see the video?
I stucked here
can anyone help me how to set LVC to get the video or any tutorials how to? If my setup is corretly
I'm helping my friend to operate from Macedonia and he has a problem with BU500.
His upconverter permannetly having some power on output so when connected with wifi booster
see the 1W output and the output power from PA didn't change a lot if press PTT on transceiver.
Then I think the wifi PA amplify signal 2256MHz if no signal from transceiver?
Question how the other having connected together wifi PA and BU500 any proposal please
yes you are right my calculator lies sorry 9360
Bingo found the A71A. As Johannes suggested...
But I found only with 24MHz modification. With 25MHz I found around 400channel on
Badr456 Eutelsat25 and 28 but no A71A.
I can go further to Octagone receiver to receive lower SR now.
Thanks for help
which FW is on your satfinder?
i have no transponder QRG...What you use full scan or blind scan?
I have 1m dish and I can receive BADR4.
How to find DATV beacon?
I saw somewhere that is possible to receive DATV with GTmedia satfinder. But I can't find how?
I have change the frequency of LNB from 25MHz to 24MHz but I can't find any programm.
Do I need any special FW for finder
a little confuse me but if I'm right
I need only to cut wires from Quartz and cut the PCB where the F connector
then solder parallel 120pF& 330nH inductor? That 's all?