Hello,
I have a GTMEDIA USB to Network Adapter, it's working on Windows but not on Linux.
My Pluto did not recognize the adapter, so I need to install these drivers.
How can I install these drivers on my Pluto ?
Thanks for help.
73 - Rudi - ON7CL
Hello,
I have a GTMEDIA USB to Network Adapter, it's working on Windows but not on Linux.
My Pluto did not recognize the adapter, so I need to install these drivers.
How can I install these drivers on my Pluto ?
Thanks for help.
73 - Rudi - ON7CL
Tnx for your input, the ethernet to usb is working when direct connect into the usb port of my pc, I think the OTG adapter cable is faulty, the power side i working, but the data side not I think.
If anyone has suggestions where to buy a good OTG cable with power lead let me know.
When I connect the ethernet to usb adapter straight to the pc I get my ip adress.
When I connect the ethernet to usb to the otg calble and connect it to my pluto, I don't get the ip adress, the otg cable has a power cable that gives power to the pluto and that is working.
So maybe the OTG side that go to the USB to Ethernet is faulty
Hello,
My pluto cannot connect to the network.
I followed the instructions from DD1US Mathias.
I bought following items:
USB 2.0 OTG adapter cable with external power input and a usb-ethernet adapter
I changed the config.txt as discribed.
I also saw a video that is posted over that item.
I also filled in a IP adres in [USB_ETHERNET], even with a blank IP adress it's not working.
USB connection pluto to pc and SDRconsole is working ok.
All help is welcome
Hello Martin,
Tnx for info, all almost ok, still need locator from OR18HCC
73 Rudi / ON7CL
Hello All,
I'm updating my logbook with the correct gridlocators for my qso-100 qso's.
I'm looking for the grids from following stations:
V55JAM
ON7EQ
UA9FFF
4X0SAT
OR18HCC
Thanks in advance for your help.
Rudi / ON7CL
Hello Eric,
Tnx for the info.
73 - Rudi
Hello,
Anyone knows how so set up above for sat tracking.
Thanks for reply.
Rudi / ON7CL
Hello,
Did find all the info, tnx for help.
73 - Rudi - ON7CL
Thanks all for the info, I'll test that.
Is it also possible to connect outside the Local Area Network ?
73 - Rudi - ON7CL
Hello,
My QO100 station is working well, is threre a possibility to use the station remote on my laptop in the garden with SDR console or other software ?
All info welcome.
Good weekend.
Rudi / ON7CL
Hello,
I'm working on a new station with a plutosdr.
I have following antenne:
I also use this biastee
Frequency range: 30 MHz - 4000 MHz
Max RF power : +33dBm (2W~)
Impedance: 50 Ohms
Max supply voltage: 22V / 350mA
Resettable fuse
Insertion loss: 0.4dB @ 2000 MHz
Operating Temperature: -20°C to +65°C
Dimension: 4 x 3 x 0.6 cm
Amateur radio design: F1OPA
The dish is pointed in the right direction and elevation, I cannot RX anything ?
What can be wrong.
Help welcome.
73 - Rudi - ON7CL
Hello Guys,
I ordered an SG-Labs Amplifier V3, 3 weeks ago, delivery time was 2 weeks, I have payed via paypal 3 weeks ago.
I already send 2 mails to SG-labs to have a status from my order.
No reply's anymore, anyone has same experience, before there was always an answer in 2 days.
Thanks for reply.
73 - Rudi - ON7CL
All pluto is running, is there a good setup video for the pluto with SDR console on QO100 ?
Tnx all for the info.
Hello,
Some time ago I did read a nice article from a pluto boxed for qo100, it was a German ham I don't remember his call and I can't find the article. Anyone knows where to find ?
I tried via search but nothing.
Thanks in advance.
Rudi / ON7CL
Tnx all for info.
Dear all,
I want to use a transverter 28mhz > 144mhz after my Icom IC-7300.
Advice is welcome, is the VHF transverter from the tranverter store in Ukraine a good choice ?
Thanks for advice.
Rudi / ON7CL
Hello, are there any pictures to do this mod to get a stable transverter ? Where to find .
73 - Rudi - ON7CL
DD0KP, thanks for reply, what dongle do you suggest and what LNB do I use ?