Threads Tagged with “Kreuzdipol”
-
- Topic
- Replies
- Last Reply
-
-
-
-
- Replies
- 7
- Views
- 3.3k
-
Shoutbox
-
-
-
DB2OS
On the WB-DATV transponder now: Neil Armstrong is speaking again as DA0Apollo and DL50AMSAT from space to earth !
-
-
-
-
-
pe1hzg
whoevers currently testing on 489.670, tuning up and down a bit, using a morse keyer to send dits and dahs, counting in italian and doesn't mention callsign - your signal peaks 15dB over the beacon you may want to check your RF output
-
-
-
-
G4GIR
Thanks for the replies, I should have been more specific,, I was wondering if anyone had received a QSL for a QSO via QO-100 with S01WS, yes I have several QSL'S for HF QSO's via OQRS, but my QSO via QO-100 is not showing up in OQRS,
-
SWL-ALLENSCHULTZ
Hi Everyone, I'm new to this, and I was wondering if there is some public database where I can find the satellite radiated power for beacon frequencies?
-
DL5RDI
G4GIR . I got several QSL from S01WS for all my QSOs - but you have to choose direct QSL and pay via PAYPAL - but this way QSL was 100% OK every time
-
-
-
-
-
-
pa1kek
Goodmorning Remco, i have question related to the dish aligment: i'm in Leiderdorp; i can receive the satelite only if i alignt the dish at 45 degres elevation intesd of 27 ! Do you have any idea why ? Besides the level of signal is poor ! Thanks for any suggestions.
-
-
-
-
-
DD0KP
do1ctl Frank brächte mal deine Hilfe.. schick mir mal deine Telefonnummer per email.. Danke Heiner..
