Using a Bullseye :
60 cm : 8.0 MER
90 cm : 11.3 MER
Hello George,
these values do not seem realistic to me.
What hardware and software is it displayed with?
73 de Robert
Using a Bullseye :
60 cm : 8.0 MER
90 cm : 11.3 MER
Hello George,
these values do not seem realistic to me.
What hardware and software is it displayed with?
73 de Robert
SUCCESS !
Using my curved waveguide for sideward rolling polarisation I´m able to receive QO-100 from its today´s 30° E position without turning the dish!
The longer way on the surface in the curved waveguide will collect the sideward rolling polarisation for good results.
for better results you have keep cool the hot outer side ....
It's a shame that the experiment will be ended again when QO-100 is back in its old position after midnight ...
btw. its only works on horizontal polarisation, why ever .... bent radius is 1 wavelength
Yes,
this type of Lens is the best one for f/D 0,68
But, you have a second lense, the plastic sewer pipe.
With its thickenings and rubber seals, it sits directly in the beam path and will certainly attenuate / break.
Have you tried this before without this pipe?
Actually I'm using a dieletric lens
Which type of lens do you use there?
I think the flat groove feed is designed for a PF with an f / D around 0.45.
Una vez que se ha cargado un archivo con un nombre incorrecto en PLUTO, no se puede cargar más.
Primero tienes que borrar el incorrecto archivo directamente en el PLUTO con Putty para que haya espacio nuevamente ...
Hast schonmal OBS im Record Modus probiert? Oder OBS- -> virtual Video -> ffmpeg -> pluto ?
Ich glaube die neueren Versionen von Evariste gehen nicht mehr mit DATV-Express ...
There is no need to send music at all, we wouldn't do it on 20m for example.
?!? there is also no need to send videos and pictures ....
I think we can´t compare wideband DATV with shortwave und its different possibilities .....
Endlosschleife in Morsecode u/o RTTY seines Rufzeichens laufen lassen ?
Thomas, das wäre wohl ein riesen Rückschritt für die Qualitätsansprüche von DATV.....
Hallo Thomas,
ich hab Dir vor gut einer Woche mal eine Nachricht im Konversationsbereich hier geschrieben ....
Kommt das nicht an?
73 de Robert
any information or a design
yes, take a look here ..
RE: Steuerung der 13cm Endstufe von Nokia
73 de Robert
Ok,
interesting.
I didn´t use the last patches from Roberto. For my case these are overloaded with options i do not need.
I use an old patch from F5UII which i´ve modified for what I need. Including a patch to move the constellation for small SR´s on the fly.
73 de Robert
No, it is misleading. This switch, force compliant, always accesses the UDP stream, regardless of where it comes from ....
73 Robert
Bert,
did you have switched of the force compliance in PLUTO controller?
If the force compliance is on, then not all ffmpeg commandos in the bat files are used!
73
Robert
A quick google for "GTX1650 hevc_nvenc" quickly leads to this post: https://forum.videohelp.com/th…ncoder-s-B-Frames-support
No, this is not the problem. I use this GTX11650 GPU with success. Also GTX1050 works ok.
But this should be common knolledge by now..
For insider maybe.
But all the newcomer, we should take care of them too ....
73 de Robert
hello, do you know the f5oeo ptt solution?
You write in riddle..... What solution do you mean?
Or do you think on Christians small ptt board?
https://www.f5uii.net/en/trans…o-plutodvb/#comment-18081
73 de Robert
Hallo Ulrich,
ich hab zusätzliche virtuelle VB-Audio Kable installiert, Version A und B !
Man kann da A und B vollkommen unterschiedlich verbinden.
Ich mache hier DATV und KGSTV und SDR-Console parallel gleichzeitig
mit entsprechenden VB Kabel Verbindungen
https://vb-audio.com/Cable/#DownloadCable
73 de Robert
VB Cable mehrere, aber das scheint unter Windows 10 nicht zu funktionieren in der SDR-Console
Also ich benutze VB Cable mit 2 Kanälen unter Windows 10 und SDR-Console. Grundsätzlich scheint es schon zu funktionieren.
73 de Robert